417-862-4455
ProFab 35 Spline 1410 Output Yoke Transfer Case 205 Pulling Truck Rock Crawler Pro-Fab
$195.00
- SKU: 3-4-5191-1
- Brand: Dana/Spicer
- Weight: 3.0
- Shipping: Calculated at checkout
2 in stock
Genuine Spicer 3-4-5191-1 End Yoke with Splined Bore. 1480 Series. Fits ProFab 35 spline HP NP205 output shafts. This yoke is set up for bolts and straps (threaded holes), but can be modified to accept u-bolts.
| Brand | Spicer |
| Series | 1410 |
| Spline Count | 35 |
| Yoke Style | BS |
| Hub Diameter R | 2.125 |
| C/L To End Hub S | 3.688 |
| Type | Splined Hole |
| Outside Yoke Dimension (In) E | 4.188 |
| Yoke Bearing Dimension (In) D | 1.188 |
| Major Diameter | 1.525 |
| Involute Spline | I |
| VMRS | 026001083 |
| Length Thru Hole Q | 2.000 |
| Material | Steel |
| Joint Angle #1 | 30 |
| Package Type | EACH |
| Package Qty | 1 |
| Weight | 2.95 LB |
| Country of Origin |
United States |
| Weight | 3.0 lbs |
|---|---|
| Dimensions | 6 × 4 × 4 in |
General Inquiries
There are no inquiries yet.
Related products
This is a genuine AAM front driveshaft flange yoke for the 4X4 front driveshaft found in 2003 and newer Dodge Ram 2500 and 3500 series trucks. This yoke is serrated and made to mate with the serrated front pinion yoke.
View Details
This is a genuine AAM rear pinion yoke for use on the early 1997 and older GM 8.5 10 bolt. This is for the Saginaw 3R series u-joint with the inside snap ring and no tabs on the yoke. This is for use with a National 2043 pinion seal and can be used on 1998 [...]
View Details
This is a genuine AAM driveshaft flange yoke that fits the rear driveline where it bolts to the rear pinion flange. This is for the 1555 series universal joint. This mates with the 40062272 4 bolt pinion flange.
View Details
This is a genuine AAM driveshaft flange yoke that shows to fit 2006+ Dodge Ram 2500 and 3500 series trucks with the 1415 series universal joints. This is the yoke that mates with the 40062272 pinion flange. Please note that the 40055983A casting number is the same on the 1485 series yoke as well.
View Details
This is a genuine Dana pinion yoke flange for a Dana 80 in a Ford truck. The Ford part number was BC3Z4851B. If you aren’t sure of your part number feel free to contact us with your differential tag number and we can check for you.
View Details
Transfer Case Parts
261/263 XHD Magna Slip Yoke 1480 U-Joint 31 Spline GM Transfer Case OEM Chevy Duramax 6.6 or 8.1 Gas
New 261 / 263 XHD Magna Transfer Case Slip Yoke 1480 U-Joint Part # 40110102 Additional Part #’s 40039594, 55-3-01672X, GM89058880, 22918657 C3-3-709-1 1480 U-Joint 2.20079″ O.D. 8.34″ Long 31 Spline 1.61417 Diameter Please be aware that there were 2 different u-joint sizes available for these trucks. A 1410 (1 3/16″ caps) and a 1480 [...]
View Details
Small Parts & Seals
This is a Dana 80 pinion yoke that mostly shows to fit Ford applications with the 1480 series u-joints. May have to remove the tin dust shield for seal clearance.
View Details
This is a genuine AAM serrated front differential flanged yoke that fits 2003-2012 Dodge 3/4 and 1 ton trucks with the 9.25 AAM 4X4 front axle assembly. This fits the 9.25 with the 14 bolt cover. The Dodge part number is 5086696AC.
View Details