417-862-4455
Round Pinion Yoke Companion Flange for Dana 60 70 2010948 Ford E350 4 Bolt
$69.00
- SKU: 2010948
- Brand: Dana/Spicer
- Weight: 3.0
- Shipping: Calculated at checkout
1 in stock
This ia a genuine Dana Spicer round pinion flange yoke that fits various Ford Dana 60 and 70 applications. If you are unsure of the part number that you need feel free to email us with a differential tag number and we can check for you.
- Specifications
- Collapse
| Brand | Spicer |
| Series | 1350 |
| Major Diameter (D) In. | 1.325 |
| Spline Count | 29 |
| Involute Spline | N |
| Pilot Diameter (C) In. | 1.811-F |
| Bolt Circle Diameter (B) In. | 4.25 |
| Bolt Hole Diameter In | M12-1.75T |
| Number Of Holes | 8 |
| Ground Hub Diameter In. | 1.875 |
| Length Thru Hole (F) In. | 1.5 |
| Flange Face To End Of Hub (G) | 1.955 |
| Companion Flange Assembly | Y |
| Material | STEEL |
| VMRS | 024002040 |
| Weight | 3 LB |
| Weight | 3.0 lbs |
|---|---|
| Dimensions | 6 × 4 × 2 in |
Be the first to review “Round Pinion Yoke Companion Flange for Dana 60 70 2010948 Ford E350 4 Bolt”
You must be logged in to post a review.
| Make | Model | Year |
|---|---|---|
| Ford | E350 | 1999 - 2000 |
| Ford | E350 | 2001 - 2002 |
| Ford | E350 | 2003 - 2004 |
| Ford | E350 | 2005 - 2006 |
| Ford | E350 | 2007 - 2008 |
| Ford | E350 | 2009 - 2010 |
General Inquiries
There are no inquiries yet.
Related products
This is a genuine AAM driveshaft flange yoke that shows to fit 2006+ Dodge Ram 2500 and 3500 series trucks with the 1415 series universal joints. This is the yoke that mates with the 40062272 pinion flange. Please note that the 40055983A casting number is the same on the 1485 series yoke as well.
View Details
This is a genuine Dana/Spicer u-joint bolt and strap kit for the GM cars and trucks with the 3R or 1344 Saginaw series pinion yoke. The Saginaw uses inside snap rings to keep the u-joint centered in the yoke. Kit includes 2 straps and 4 bolts.
View Details
This is a genuine AAM driveshaft slip yoke for a 1555 series driveline in a 2006 and newer Dodge Ram 2500 or 3500 series truck. It measures 9.52756″ long (from center of u-joint) 2.29961″ O.D. (where it slips into the transfer case) and 1.74803″ 34 spline. This yoke has been discontinued from AAM and 40098344 [...]
View Details
Small Parts & Seals
This is a Dana 80 pinion yoke that mostly shows to fit Ford applications with the 1480 series u-joints. May have to remove the tin dust shield for seal clearance.
View Details
This is a genuine AAM slip yoke with a balancer that fits GM 4X4 1/2 ton trucks and SUV’s with the 246 transfer case and 1344 or 3R series universal joints. This slip yoke is 32 spline.
View Details
Transfer Case Parts
261/263 XHD Magna Slip Yoke 1480 U-Joint 31 Spline GM Transfer Case OEM Chevy Duramax 6.6 or 8.1 Gas
New 261 / 263 XHD Magna Transfer Case Slip Yoke 1480 U-Joint Part # 40110102 Additional Part #’s 40039594, 55-3-01672X, GM89058880, 22918657 C3-3-709-1 1480 U-Joint 2.20079″ O.D. 8.34″ Long 31 Spline 1.61417 Diameter Please be aware that there were 2 different u-joint sizes available for these trucks. A 1410 (1 3/16″ caps) and a 1480 [...]
View Details
This is a genuine AAM rear pinion yoke for use on the early 1997 and older GM 8.5 10 bolt. This is for the Saginaw 3R series u-joint with the inside snap ring and no tabs on the yoke. This is for use with a National 2043 pinion seal and can be used on 1998 [...]
View Details
This is a genuine Dana pinion yoke for a 1410 series u-joint that fits Dana 80 rear differentials. This will fit GM, Ford, and Dodge applications. This yoke is the same as the more expensive 3-4-11081-1X. It just has a little different dust shield on it. This one actually has more seal clearance.
View Details
Reviews
There are no reviews yet.