417-862-4455No products in the cart.
ProFab 35 Spline 1480 Output Yoke Transfer Case 205 Pulling Truck Rock Crawler Pro-Fab
$160.00
- SKU: 3-4-6691-1
- Brand: Dana/Spicer
- Weight: 3.6
- Shipping: Calculated at checkout
Genuine Spicer 3-4-6691-1 End Yoke with Splined Bore. 1480 Series. Fits ProFab 35 spline HP NP205 output shafts. This yoke is set up for bolts and straps (threaded holes), but can be modified to accept u-bolts.
| Brand | Spicer |
| Series | 1480 |
| Spline Count | 35 |
| Yoke Style | BS |
| Hub Diameter R | 2.125 |
| C/L To End Hub S | 4.031 |
| Type | Splined Hole |
| Outside Yoke Dimension (In) E | 4.188 |
| Yoke Bearing Dimension (In) D | 1.375 |
| Major Diameter | 1.525 |
| Involute Spline | I |
| VMRS | 026001083 |
| Length Thru Hole Q | 2.000 |
| Material | Steel |
| Joint Angle #1 | 22 |
| Package Type | EACH |
| Package Qty | 1 |
| Weight | 3.59 LB |
| Country of Origin |
United States |
| Weight | 3.6 lbs |
|---|---|
| Dimensions | 6 × 6 × 6 in |
Related products
Out of stock
$89.01
This is a genuine AAM pinion yoke with the balancer for the GM 3/4 and 1 ton trucks with the 11.5 rear differential 1999 and newer. This is for the 1480 or 1485 series u-joint. Can also be used on the 14 bolt 10.5 rear differentials.
View Details
Transfer Case Parts
261/263 XHD Magna Slip Yoke 1480 U-Joint 31 Spline GM Transfer Case OEM Chevy Duramax 6.6 or 8.1 Gas
$75.00
New 261 / 263 XHD Magna Transfer Case Slip Yoke 1480 U-Joint Part # 40110102 Additional Part #’s 40039594, 55-3-01672X, GM89058880, 22918657 C3-3-709-1 1480 U-Joint 2.20079″ O.D. 8.34″ Long 31 Spline 1.61417 Diameter Please be aware that there were 2 different u-joint sizes available for these trucks. A 1410 (1 3/16″ caps) and a 1480 [...]
View Details
$60.00
This is a genuine AAM front driveshaft flange yoke for the 4X4 front driveshaft found in 2003 and newer Dodge Ram 2500 and 3500 series trucks. This yoke is serrated and made to mate with the serrated front pinion yoke.
View Details
Yokes
GM 8.6 Pinion Yoke 8.6 10 Bolt Rear Differential 1999+ 3R Series U-Joint Inside Snap Rings Chevy
$85.00
This is a genuine AAM pinion yoke that fits the GM 10 bolt rear differential with the 8.6″ ring gear found in Chevy trucks from 1999+. This is for the 3R series u-joint with inside snap rings. This is the late style yoke with the factory wear sleeve on it. This can be used in [...]
View Details
$80.00
This is a genuine AAM pinion yoke that shows to fit GM trucks with either the 10.5 or 11.5 rear differential in a 1480/1485 series. These show to be used in 2010 and newer trucks, but can also be used for earlier applications when upgrading to the larger universal joints. This is also with a [...]
View Details
$95.00
This is a genuine AAM driveshaft flange yoke that shows to fit 2006+ Dodge Ram 2500 and 3500 series trucks with the 1415 series universal joints. This is the yoke that mates with the 40062272 pinion flange. Please note that the 40055983A casting number is the same on the 1485 series yoke as well.
View Details
Small Parts & Seals
$135.00
This is a genuine Dana 80 pinion yoke for the 1410 series u-joint. This fits all Dana 80’s including Chevy, Ford, and Dodge. Some applications may require removal of tin dust shield for seal clearance.
View Details
$45.00
This is a genuine AAM rear pinion yoke for use on the early 1997 and older GM 8.5 10 bolt. This is for the Saginaw 3R series u-joint with the inside snap ring and no tabs on the yoke. This is for use with a National 2043 pinion seal and can be used on 1998 [...]
View Details