417-862-4455
Saginaw 3R 1344 Pinion Yoke 8.5 10 Bolt Rear 8.25IFS 9.25IFS Front GM Chevy Car Truck
$45.00
- SKU: 40025925
- Brand: AAM American Axle Manufacturing
- Weight: 3.0
- Shipping: Calculated at checkout
3 in stock
This is a genuine AAM pinion yoke for the 8.5 10 bolt rear differential found in many GM cars and trucks from 1973-1998. This is for the Saginaw u-joint that uses inside snap rings to keep the u-joint centered in the yoke. These were also us in 4wd front 8.25IFS and 9.25IFS from 1988-2010. The Powertrain part number for this yoke is 3R04-02. You can use this yoke with a 26060975 sleeve to replace the 40029412 for an 8.6″ rear axle. It would be quite a bit cheaper.
| Weight | 3.0 lbs |
|---|---|
| Dimensions | 6 × 6 × 6 in |
General Inquiries
There are no inquiries yet.
Related products
This is a genuine AAM rear pinion yoke for the GM trucks with the 14 bolt 9.5 differential. These were in the light 3/4 trucks and has c-clips on the axles. These are for the 1350 series u-joint. This is the later style yoke with the sleeve on the seal surface. This can also be [...]
View Details
This is a genuine AAM driveshaft slip yoke for a 1555 series driveline in a 2006 and newer Dodge Ram 2500 or 3500 series truck. It measures 9.52756″ long (from center of u-joint) 2.29961″ O.D. (where it slips into the transfer case) and 1.74803″ 34 spline. This yoke has been discontinued from AAM and 40098344 [...]
View Details
This is a genuine AAM 1410 series rear pinion yoke for the GM 9.5 rear differential. This can also be used on the 8.5/8.6 10 bolt rear differential found in the 1/2 trucks form 1981-current. This is the later style yoke with the wear sleeve on the seal surface so you must use the late [...]
View Details
Miscellaneous
GM 14 Bolt 10.5/11.5 Rear End Pinion Yoke Differential Full Float 1410 1415 Series U-Joint
This is an aftermarket Powertrain Industries pinion yoke for a 14 bolt with the 10.5″ or 11.5″ ring gear in a GM truck. This is the late style yoke with the sleeve on the seal surface. Can be used on all year trucks from 1973-current as long as you use the late pinion seal (26064030) [...]
View Details
This is a genuine Dana pinion yoke for a 1410 series u-joint that fits Dana 80 rear differentials. This will fit GM, Ford, and Dodge applications. This yoke is the same as the more expensive 3-4-11081-1X. It just has a little different dust shield on it. This one actually has more seal clearance.
View Details
This is a genuine AAM driveshaft flange yoke that shows to fit 2006+ Dodge Ram 2500 and 3500 series trucks with the 1415 series universal joints. This is the yoke that mates with the 40062272 pinion flange. Please note that the 40055983A casting number is the same on the 1485 series yoke as well.
View Details
This is a genuine AAM driveshaft flange yoke that fits the rear driveline where it bolts to the rear pinion flange. This is for the 1555 series universal joint. This mates with the 40062272 4 bolt pinion flange.
View Details
This is a genuine Dana pinion yoke flange for a Dana 80 in a Ford truck. The Ford part number was BC3Z4851B. If you aren’t sure of your part number feel free to contact us with your differential tag number and we can check for you.
View Details