417-862-4455
Transfer Case Tailhousing Extension Dodge 241DHD w/speedo 1998-2002
$225.00
- SKU: 42699
- Brand: USA Standard
- Weight: 7.0
- Shipping: Calculated at checkout
2 in stock
This is a new aftermarket tail housing for the 241DHD transfer case found in many 1998-2002 Dodge Ram 2500 and 3500 series trucks. This housing has a machined opening for the speedometer gear. Original casting number was 26418. This housing includes a new bushing for the slip yoke and a rear seal.
| Weight | 7.0 lbs |
|---|---|
| Dimensions | 6 × 6 × 8 in |
General Inquiries
There are no inquiries yet.
Related products
Transfer Case Parts
This Morse chain fits all NP246 GM transfer cases and most 261LD GM tranfer cases. It is 1 1/4″ wide and has 49 links.
View Details
Small Parts & Seals
271 & 273 Dodge Transfer Case Large Booted Rear Seal 271D 273D 2003+
This is the large booted seal for the rear of a 271 or 273 Dodge transfer case with a rear slip yoke. The New Venture part number is 38249. These are almost impossible to get at your local auto parts store. These are used with the 45379 rear bushing. This seal can also be used [...]
View Details
Transfer Case Parts
This range slider fits all versions of the 231 241 and 261 transfer cases, except 241DHD with the PTO opening on the side of the transfer case. Including GM, Dodge, and Jeep.
View Details
Transfer Case Parts
This is the hub that splines into the sprocket and synchronizer clutch and rides on the mainshaft of the transfer case on a 261 or 263 GM. This one is made to use the seperate synchronizer clutch. Be sure that yours is made like this as some were a 1 piece design with the synchronizer [...]
View Details
Transfer Case Parts
This transfer case sprocket is used in both Ford and Dodge 271 and 273 units. Both sprockets are the same in these units.
View Details
Transfer Case Parts
263 GM Transfer Case Range Slider Updated Wide Groove 263HD 263XHD
This range slider fits all versions of the 263 GM transfer case including 263XHD. This is the updated slider with the wide groove. To be used with the 41819 range fork. This interchanges with part number 43681.
View Details
Transfer Case Parts
27 spline female coupler used between GM 205 transfer case and TH350 or 700R4 automatic
27 spline female coupler used between GM automatic transmissions and New Process 205 gear driven transfer case. Typically used with turbo 350 or 700R4.
View Details
Transfer Case Parts
GM NP261HD and NP263HD GM Transfer Case Chain Chevy 1999-2007
This Morse chain fits mots 261HD and 263HD GM transfer cases. It is 1 1/2″ wide and 49 links. Be sure to check your chain before ordering as I have seen the HV072 or HV074 chains in these units.
View Details