417-862-4455
1415/1410 Slip Yoke 36 Spline Driveshaft at Carrier Bearing GM Chevy Dodge 2003+
$65.00
- SKU: 40021321
- Brand: AAM American Axle Manufacturing
- Weight: 5.0
- Shipping: Calculated at checkout
2 in stock
- Description
- Slip Yoke for two piece driveshaft 1415/1410 series
- Application
- 2003 and newer Chevy Silverado and Dodge Ram 2500, 3500
- Fits Years
- 2003 and newer
- Length
- 7.28 inches
- Splines
- 1.55 inches – 35 based on 36 splines
- Barrel OD
- 2.07 inches
- Series
- 1415/1410
- OEM Numbers and Replacement Numbers
- 05093363AA
- Catalog Number
- 74081321
- Comments
- Order 40021327 boot if needed
| Weight | 5.0 lbs |
|---|---|
| Dimensions | 9 × 4 × 2 in |
General Inquiries
There are no inquiries yet.
Related products
New 246 261 263 Transfer Case Slip Yoke 1344/3R U-Joint Part # 40032054 1344/3R U-Joint 1.88583″ O.D. 7.87402″ Long 32 Spline 1.37402″ Diameter This is a genuine AAM part. OEM Numbers and Replacement Numbers N3R-3-1642X, 40012495, N3R-3-9161X, GM 12479383, 88963576, 7838665, 40009290, 40026154
View Details
Transfer Case Parts
DODGE RAM TRUCK 3500 2500 40038571 1480/1485 2003+ Slip Yoke Transfer Case 271
This is a genuine AAM slip yoke that fits the 271 or 273 transfer case found in 2003-2011 Dodge Ram 2500 and 3500 series trucks. Technical specifications, 2.299″ Ground Hub (barrel diameter), 1.74803 spline diameter 34 spline, 9.550″ C/l to end. This slip uses the AAM u-joint number 74081485. Please check the u-joint size in [...]
View Details
This is a genuine AAM male slip yoke for the front of a GM transfer case, such as 246, 261, or 263. This is for the front driveline where it slips into the transfer case. This is for the 3R or 1344 series universal joint.
View Details
This is a genuine AAM driveshaft flange yoke that fits the rear driveline where it bolts to the rear pinion flange. This is for the 1555 series universal joint. This mates with the 40062272 4 bolt pinion flange.
View Details
Yokes
GM 8.6 Pinion Yoke 8.6 10 Bolt Rear Differential 1999+ 3R Series U-Joint Inside Snap Rings Chevy
This is a genuine AAM pinion yoke that fits the GM 10 bolt rear differential with the 8.6″ ring gear found in Chevy trucks from 1999+. This is for the 3R series u-joint with inside snap rings. This is the late style yoke with the factory wear sleeve on it. This can be used in [...]
View Details
This is a genuine AAM 1410 series rear pinion yoke for the GM 9.5 rear differential. This can also be used on the 8.5/8.6 10 bolt rear differential found in the 1/2 trucks form 1981-current. This is the later style yoke with the wear sleeve on the seal surface so you must use the late [...]
View Details
This is a genuine AAM pinion yoke with the balancer for the GM 3/4 and 1 ton trucks with the 11.5 rear differential 1999 and newer. This is for the 1480 or 1485 series u-joint. Can also be used on the 14 bolt 10.5 rear differentials.
View Details
This is a genuine AAM pinion yoke that fits all GM 7.5/7.6/8.0 rear differentials. These were found in S10’s, Camaro’s, and Trailblazers. This is the later style yoke with the wear sleeve made on it, so you will have to use the 1998+ pinion seal. This is for the 1344 or 3R series u-joint with [...]
View Details