417-862-4455
SPL90 Pinion Yoke Pulling Truck Timken Rockwell Meritor 1 3/4-10 Spline
$160.00
- SKU: 90-4-371-1
- Brand: Dana/Spicer
- Weight: 8.0
- Shipping: Calculated at checkout
1 in stock
JOINT SERIES: SPL90
D DIMENSION: 1.625
E DIMENSION: 4.957
YOKE STYLE: Bearing Strap
Q LENGTH THRU HOLE: 1.938
R HUB DIAMETER: 2.5
S CENTERLINE TO END: 4.125
SPLINE COUNT: 10
SPLINE OD: 1.75
Also fits some manual transmissions.
| Weight | 8.0 lbs |
|---|---|
| Dimensions | 6 × 6 × 6 in |
Related products
This is a genuine AAM rear pinion yoke for the GM trucks with the 14 bolt 9.5 differential. These were in the light 3/4 trucks and has c-clips on the axles. These are for the 1350 series u-joint. This is the later style yoke with the sleeve on the seal surface. This can also be [...]
View Details
Transfer Case Parts
DODGE RAM TRUCK 3500 2500 40038571 1480/1485 2003+ Slip Yoke Transfer Case 271
This is a genuine AAM slip yoke that fits the 271 or 273 transfer case found in 2003-2011 Dodge Ram 2500 and 3500 series trucks. Technical specifications, 2.299″ Ground Hub (barrel diameter), 1.74803 spline diameter 34 spline, 9.550″ C/l to end. This slip uses the AAM u-joint number 74081485. Please check the u-joint size in [...]
View Details
Transfer Case Parts
261/263 XHD Magna Slip Yoke 1480 U-Joint 31 Spline GM Transfer Case OEM Chevy Duramax 6.6 or 8.1 Gas
New 261 / 263 XHD Magna Transfer Case Slip Yoke 1480 U-Joint Part # 40110102 Additional Part #’s 40039594, 55-3-01672X, GM89058880, 22918657 C3-3-709-1 1480 U-Joint 2.20079″ O.D. 8.34″ Long 31 Spline 1.61417 Diameter Please be aware that there were 2 different u-joint sizes available for these trucks. A 1410 (1 3/16″ caps) and a 1480 [...]
View Details
This is a genuine AAM driveshaft slip yoke for a 1555 series driveline in a 2006 and newer Dodge Ram 2500 or 3500 series truck. It measures 9.52756″ long (from center of u-joint) 2.29961″ O.D. (where it slips into the transfer case) and 1.74803″ 34 spline. This yoke has been discontinued from AAM and 40098344 [...]
View Details
This is a genuine AAM pinion yoke that fits all GM 7.5/7.6/8.0 rear differentials. These were found in S10’s, Camaro’s, and Trailblazers. This is the later style yoke with the wear sleeve made on it, so you will have to use the 1998+ pinion seal. This is for the 1344 or 3R series u-joint with [...]
View Details
This is a genuine AAM male slip yoke for the front of a GM transfer case, such as 246, 261, or 263. This is for the front driveline where it slips into the transfer case. This is for the 3R or 1344 series universal joint.
View Details
This is a genuine Dana pinion yoke for a 1410 series u-joint that fits Dana 80 rear differentials. This will fit GM, Ford, and Dodge applications. This yoke is the same as the more expensive 3-4-11081-1X. It just has a little different dust shield on it. This one actually has more seal clearance.
View Details
This is a genuine AAM driveshaft flange yoke that shows to fit 2006+ Dodge Ram 2500 and 3500 series trucks with the 1415 series universal joints. This is the yoke that mates with the 40062272 pinion flange. Please note that the 40055983A casting number is the same on the 1485 series yoke as well.
View Details