This is a genuine Dana/Spicer Trac Lok posi for 373 and 354 gear ratios in Dodge applications. Can be used in Fords with 354 gears, but be careful with 373 applications as most Ford’s used a 373 gearset with a thin ring gear and a 410 and up differential carrier. These axle gears are the 1 1/2″ 35 spline. This can be used to replace the Power Lok differentials in earlier Dodge applications. Shipping is FAST and FREE in the continental U.S.
2011842 Dana 80 Rear Differential Trac Lok Posi 35 Spline 3.73 & Down 708054 Dodge Ford
$995.00
- SKU: 708054
- Brand: Dana/Spicer
- Weight: 50.0
- Shipping: Calculated at checkout
1 in stock
| Weight | 50.0 lbs |
|---|---|
| Dimensions | 12 × 12 × 12 in |
1 review for 2011842 Dana 80 Rear Differential Trac Lok Posi 35 Spline 3.73 & Down 708054 Dodge Ford
Add a review
You must be logged in to post a review.
| Make | Model | Year |
|---|---|---|
| Dodge Ram | 2500 | 1994 - 1995 |
| Dodge Ram | 2500 | 1996 - 1997 |
| Dodge Ram | 2500 | 1998 - 1999 |
| Dodge Ram | 2500 | 2000 - 2001 |
| Dodge Ram | 2500 | 2002 |
| Dodge Ram | 3500 | 1994 - 1995 |
| Dodge Ram | 3500 | 1996 - 1997 |
| Dodge Ram | 3500 | 1998 - 1999 |
| Dodge Ram | 3500 | 2000 - 2001 |
| Dodge Ram | 3500 | 2002 |
| Ford | F350 | 1992 - 1993 |
| Ford | F350 | 1994 - 1995 |
| Ford | F350 | 1996 - 1997 |
| Ford | F350 | 1998 - 1999 |
| Ford | F350 | 2000 - 2001 |
| Ford | F350 | 2002 - 2003 |
| Ford | F350 | 2004 - 2005 |
| Ford | F350 | 2006 - 2007 |
| Ford | F350 | 2008 - 2009 |
| Ford | F350 | 2010 |
General Inquiries
There are no inquiries yet.
Related products
Traction Devices
Dana 70 32 Spline Trac Lok Limited Slip Posi Differential 4:10 and Lower Numerically
This is a genuine Dana/Spicer Trac Lok differential for a Dana 70 rear with 32 axle splines and 4:10 and numerically lower gear ratios (3:73, 3:54). This is a lower cost alternative to the Power Lok differentials found in most Dana 70’s. This a a narrow differential carrier, and may require outboard spacers (701098X).
View DetailsTraction Devices
Jeep Dana Super 44 Hydra Lok Vari Lok Limited Slip Differential Carrier Assembly 7/16″ Bolt Holes
This is a genuine Dana Hydra Lok or Vari Lok limited slip differential for a Dana 44 in a late model Jeep. This one is drilled for the 7/16″ ring gear bolts. The plenum for this differential is sold seperately under part number 52783. This unit will only work to replace a Hydra Lok or [...]
View DetailsAxle: Differential Cases – Traction Enhancing See All Differential Cases – Traction Enhancingback to top AAM# Vehicle Make Year Axle Type Axle Ratio # of Teeth Notes 40047279 Dodge 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 9.25″ Beam – Front Axle 3.42+ 33 / 1.41″ TracRite EL – Open Differential [...]
View DetailsThis is a genuine AAM helical gear posi for the GM 8.5 & 8.6 differential found in most GMC and Chevrolet 1/2 ton trucks from 1990 to current with 30 spline axles. This will work for gear ratios 2:73 and up. If your truck is 2000 or older with drum brakes you will need LM102949 [...]
View DetailsTraction Devices
Dana 80 37 Spline Posi Track Differential Ford 4:10 and Down Helical Truetrac GM 3500HD
This is a genuine Dana/Spicer posi track differential. This is the helical or Truetrac style posi that uses worm gears instead of axle and spider gears with clutches. this is for 37 spline axles and is for 4:10 and slower (4:56, 4:63, 4:88 etc.). These were commonly found in F450 trucks from the early 1990’s [...]
View DetailsThis is an aftermarket replacement for the Trac Lok posi differential found in older Jeep, GM, Dodge, and Ford vehicles. This is for the 3:92 and slower gear ratios (4:10; 4:56, etc.)
View DetailsTraction Devices
This is a genuine AAM posi trac differential for 1997 and newer Ford 1/2 ton trucks and SUVs with the 9.75 ring gear. It is the same as the Dana 73106X.
View DetailsTraction Devices
Ford 10.5 Posi Trac Differential 3 Pinion AAM 1999+ F250 F350
This is a genuine AAM 3 pinion Posi for the 10.5 Ford differential found in 1999 and newer F250 and F350 trucks. This is the later 3 pinion design.
View Details
417-862-4455




Robert H. –
Trac Lok carrier not installed yet so I can’t rate it, but C&M is prompt and a pleasure to deal with.