This is a genuine Dana/Spicer loaded open differential for the M300 rear axle found in many 2017 and newer Ford F350 trucks. This differential has 37 spline axle gears and includes both side bearings and races (10124439) with bearing numbers 3994 and race numbers 3920.
2017+ Ford F350 M300 Loaded Open Differential 37 Spline 3:73 and Down
$650.00
- SKU: 10043126
- Brand: Dana/Spicer
- Weight: 60.0
- Shipping: Calculated at checkout
Weight | 60.0 lbs |
---|---|
Dimensions | 12 × 12 × 12 in |
Related products
This is a genuine AAM spider gear kit that fits GM SUVs trucks with the 8.0 28 spline open differentials. Applications include Colorado, Canyon, and Trailblazers. This will not work in a posi trac or limited slip carrier.
View DetailsDana 70/80 Trac-Loc Clutches Dana 70 and Dana 80; Includes Clutches And Steels; Includes Clutches For Both Side Gears Dana Spicer Dana 70/80 Trac-Loc Clutches 702009 Locking Differential Clutch Pack. The new Dana part number is 2003819, but we still stock it under the original part number 702009.
View DetailsThis is a genuine AAM open differental assembly for the 10.5 rear differential found in some 2003+ Dodge Ram trucks.
View DetailsThis is a genuine AAM spider gear kit that fits GM trucks with the 9.25 front or 9.5 rear 14 bolt 33 spline open differentials. These are for all years in GM applications and from 2003-2006 in Dodge 3/4 and 1 ton front differentials. Note that the small pinion gears are flat and use 1/4″ [...]
View DetailsCases & Spiders
This is a genuine AAM loaded open differential carrier assembly that fit the GM 7.6 or 7 5/8″ rear differential with 28 spline axles and 3:23 or numerically higher (3:42, 3:73, etc.). These were used in early 1990’s and newer S10’s and Camaro’s.
View DetailsThis is a genuine AAM spider gear kit for the 10.5 rear differential found in 1999 and newer Ford F250 and F350 trucks. This is for the 3 pinion gear setup and is for the open differential, not for the limited slip differential. For some reason the Y or cross is not included with this [...]
View DetailsThis is a genuine AAM Axle Gear kit that fits all year GM and Dodge trucks with the 11.5 rear differential. This will only work with a factory open carrier and not a posi or limited slip.
View DetailsThis is a genuine AAM axle gear/internal kit for the Dodge 9.25 front end found in 2007 and newer 3/4 and 1 ton trucks. Please note the smaller pinion gears are rounded where they contact the carrier and use thin thrust washers. From 2003-2006 Dodge used the same internal kit as the GM trucks which [...]
View Details