417-862-4455
2019+ Dodge Ram 2500 3500 11.5 Rear Axle Pinion Flange Yoke 32 Spline
$65.00
- SKU: 40194031
- Brand: AAM American Axle Manufacturing
- Weight: 6.0
- Shipping: Calculated at checkout
2 in stock
This is a genuine AAM pinion flange for the 11.5 AAM rear axle found in many 2019+ Dodge Ram 2500 and 3500 series trucks. The Dodge part number is 68455328AA. The Powertrain part number is 5501-312.
| Weight | 6.0 lbs |
|---|---|
| Dimensions | 10 × 4 × 4 in |
General Inquiries
There are no inquiries yet.
Related products
This is a genuine AAM pinion yoke that fits all GM 7.5/7.6/8.0 rear differentials. These were found in S10’s, Camaro’s, and Trailblazers. This is the later style yoke with the wear sleeve made on it, so you will have to use the 1998+ pinion seal. This is for the 1344 or 3R series u-joint with [...]
View Details
This is a genuine AAM front driveshaft flange yoke for the 4X4 front driveshaft found in 2003 and newer Dodge Ram 2500 and 3500 series trucks. This yoke is serrated and made to mate with the serrated front pinion yoke.
View Details
This is a genuine AAM pinion yoke with the balancer for the GM 3/4 and 1 ton trucks with the 11.5 rear differential 1999 and newer. This is for the 1480 or 1485 series u-joint. Can also be used on the 14 bolt 10.5 rear differentials.
View Details
This is a genuine AAM slip yoke with a balancer that fits GM 4X4 1/2 ton trucks and SUV’s with the 246 transfer case and 1344 or 3R series universal joints. This slip yoke is 32 spline.
View Details
This is a genuine Dana pinion yoke flange for a Dana 80 in a Ford truck. The Ford part number was BC3Z4851B. If you aren’t sure of your part number feel free to contact us with your differential tag number and we can check for you.
View Details
Small Parts & Seals
This is a Dana 80 pinion yoke that mostly shows to fit Ford applications with the 1480 series u-joints. May have to remove the tin dust shield for seal clearance.
View Details
This is a genuine AAM rear pinion yoke for the GM trucks with the 14 bolt 9.5 differential. These were in the light 3/4 trucks and has c-clips on the axles. These are for the 1350 series u-joint. This is the later style yoke with the sleeve on the seal surface. This can also be [...]
View Details
This is a genuine Dana pinion yoke for a 1410 series u-joint that fits Dana 80 rear differentials. This will fit GM, Ford, and Dodge applications. This yoke is the same as the more expensive 3-4-11081-1X. It just has a little different dust shield on it. This one actually has more seal clearance.
View Details