This is a genuine AAM rear pinion yoke for the GM trucks with the 14 bolt 9.5 differential. These were in the light 3/4 trucks and has c-clips on the axles. These are for the 1350 series u-joint. This is the later style yoke with the sleeve on the seal surface. This can also be usaed in earlier trucks as long as you use the later 26064029 pinion seal. This can also be used to upgrade a 1/2 ton truck with a 10 bolt to the larger 1350 u-joint, again you must use the later 26064028 seal.
GM Chevy 8.5/8.6 10 Bolt or 9.5 14 Bolt Rear Pinion Yoke 1350 Series U-Joint
$47.50
- SKU: 26060881
- Brand: AAM American Axle Manufacturing
- Weight: 4.0
- Shipping: Calculated at checkout
Out of stock
Weight | 4.0 lbs |
---|---|
Dimensions | 6 × 4 × 2 in |
Be the first to review “GM Chevy 8.5/8.6 10 Bolt or 9.5 14 Bolt Rear Pinion Yoke 1350 Series U-Joint”
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
GM/Chevy | 1500 | 1981 - 1982 |
GM/Chevy | 1500 | 1983 - 1984 |
GM/Chevy | 1500 | 1985 - 1986 |
GM/Chevy | 1500 | 1987 - 1988 |
GM/Chevy | 1500 | 1989 - 1990 |
GM/Chevy | 1500 | 1991 - 1992 |
GM/Chevy | 1500 | 1993 - 1994 |
GM/Chevy | 1500 | 1995 - 1996 |
GM/Chevy | 1500 | 1997 - 1998 |
GM/Chevy | 1500 | 1999 - 2000 |
GM/Chevy | 1500 | 2001 - 2002 |
GM/Chevy | 1500 | 2003 - 2004 |
GM/Chevy | 1500 | 2005 - 2006 |
GM/Chevy | 1500 | 2007 - 2008 |
GM/Chevy | 1500 | 2009 - 2010 |
GM/Chevy | 1500 | 2011 - 2012 |
GM/Chevy | 1500 | 2013 - 2014 |
GM/Chevy | 2500 | 1981 - 1982 |
GM/Chevy | 2500 | 1983 - 1984 |
GM/Chevy | 2500 | 1985 - 1986 |
GM/Chevy | 2500 | 1987 - 1988 |
GM/Chevy | 2500 | 1989 - 1990 |
GM/Chevy | 2500 | 1991 - 1992 |
GM/Chevy | 2500 | 1993 - 1994 |
GM/Chevy | 2500 | 1995 - 1996 |
GM/Chevy | 2500 | 1997 - 1998 |
GM/Chevy | 2500 | 1999 - 2000 |
GM/Chevy | 2500 | 2001 - 2002 |
GM/Chevy | 2500 | 2003 - 2004 |
GM/Chevy | 2500 | 2005 - 2006 |
GM/Chevy | 2500 | 2007 - 2008 |
GM/Chevy | 2500 | 2009 - 2010 |
GM/Chevy | 2500 | 2011 - 2012 |
GM/Chevy | 2500 | 2013 - 2014 |
Related products
This is a genuine Dana pinion yoke flange for a Dana 80 in a Ford truck. The Ford part number was BC3Z4851B. If you aren’t sure of your part number feel free to contact us with your differential tag number and we can check for you.
View DetailsThis is a genuine AAM rear pinion yoke for use on the early 1997 and older GM 8.5 10 bolt. This is for the Saginaw 3R series u-joint with the inside snap ring and no tabs on the yoke. This is for use with a National 2043 pinion seal and can be used on 1998 [...]
View DetailsThis is a genuine AAM serrated front differential flanged yoke that fits 2003-2012 Dodge 3/4 and 1 ton trucks with the 9.25 AAM 4X4 front axle assembly. This fits the 9.25 with the 14 bolt cover.
View DetailsThis is a genuine AAM driveshaft slip yoke for a 1555 series driveline in a 2006 and newer Dodge Ram 2500 or 3500 series truck. It measures 9.52756″ long (from center of u-joint) 2.29961″ O.D. (where it slips into the transfer case) and 1.74803″ 34 spline. This yoke has been discontinued from AAM and 40098344 [...]
View DetailsNew 246 261 263 Transfer Case Slip Yoke 1344/3R U-Joint Part # 40032054 1344/3R U-Joint 1.88583″ O.D. 7.87402″ Long 32 Spline 1.37402″ Diameter This is a genuine AAM part. OEM Numbers and Replacement Numbers N3R-3-1642X, 40012495, N3R-3-9161X, GM 12479383, 88963576, 7838665, 40009290, 40026154
View DetailsThis is a genuine Dana pinion yoke for a 1410 series u-joint that fits Dana 80 rear differentials. This will fit GM, Ford, and Dodge applications. This yoke is the same as the more expensive 3-4-11081-1X. It just has a little different dust shield on it. This one actually has more seal clearance.
View DetailsTransfer Case Parts
DODGE RAM TRUCK 3500 2500 40038571 1480/1485 2003+ Slip Yoke Transfer Case 271
This is a genuine AAM slip yoke that fits the 271 or 273 transfer case found in 2003-2011 Dodge Ram 2500 and 3500 series trucks. Technical specifications, 2.299″ Ground Hub (barrel diameter), 1.74803 spline diameter 34 spline, 9.550″ C/l to end. This slip uses the AAM u-joint number 74081485. Please check the u-joint size in [...]
View DetailsSmall Parts & Seals
This is a genuine Dana 80 pinion yoke for the 1410 series u-joint. This fits all Dana 80’s including Chevy, Ford, and Dodge. Some applications may require removal of tin dust shield for seal clearance.
View Details
Reviews
There are no reviews yet.