This is a genuine AAM protective cover bracket for the 4X4 front axle found in many 2019 and newer Dodge Ram 2500, 3500, 4500, and 5500 series trucks. This bracket is stamped “NO JACK”. This goes with the 40178466 actuator.
2019+ Dodge Ram 2500 3500 4500 5500 4X4 Front Axle Actuator Cover Bracket NO JACK
$17.50
- SKU: 40169924
- Brand: AAM American Axle Manufacturing
- Weight: 3.0
- Shipping: Calculated at checkout
Weight | 3.0 lbs |
---|---|
Dimensions | 8 × 6 × 6 in |
Related products
This is a genuine AAM pinion nut that fits the 11.5 rear differential found in 3/4 and 1 ton GM & Dodge trucks. We also have the washer (40003255) available for this nut. This nut also fits the 10.5 Dodge rear differential. We use a 1 7/16″ 12 point socket on these, but it may [...]
View DetailsMiscellaneous
Dana 70 80 Rear Hub Nut Nylon Lock 2″ 16 TPI 2 9/16″ Socket Full Float Dodge, Ford, GM
This is an aftermarket rear hub nut for use on Dana 70 and 80 rear axles with 2″ 16 threads per inch. This is the style that uses a wedge key that drives in a keyway on the top of the spindle and cuts through the nylon part of this nut. This nut is right [...]
View DetailsThis is a genuine Dana wedge shaped key that drives into the nylon part of the lock nut on a Dana 70 or 80 full floating rear axle found in Dodge, Ford, and GM trucks.
View DetailsMiscellaneous
GM 14 Bolt 10.5/11.5 Rear End Pinion Yoke Differential Full Float 1410 1415 Series U-Joint
This is an aftermarket Powertrain Industries pinion yoke for a 14 bolt with the 10.5″ or 11.5″ ring gear in a GM truck. This is the late style yoke with the sleeve on the seal surface. Can be used on all year trucks from 1973-current as long as you use the late pinion seal (26064030) [...]
View DetailsThis is a genuine AAM front differential lock t-tab. This is the tab that locks the side adjusters in place. There are 2 required per differential. This style was used from 1988-2006. The GM part number was 3727182. We also have the round style for 2007+.
View DetailsThis is a genuine AAM rear hub snap ring that holds the outer bearing in the hub on a full floating 10.5 rear axle in GM trucks for 1973-2010. This snap ring measures 3 1/2″ O.D.
View DetailsThis is a genuine AAM front axle disconnect kit for 2001 and newer 3/4 and 1 ton GM 4X4 trucks with the 9.25IFS front differential. This kit includes the actuator and most wear items associated with the front differential.
View DetailsMiscellaneous
Ford Dana 80 & 10.25 10.5 Rear Axle Ratchet Hub Nut Ratcheting Spindle 2″ Right RH Thread
This is a genuine Dana ratchet style hub nut used on the Ford Dana 80 or 10.25 and 10.5 rear full floating axles. This one has right hand threads.
View Details