This is a new front case 1/2 for a 261XHD New Venture or New Process transfer case found in GM trucks with a Duramax siesel or 8.1 gas engine. This case includes new bearings for the input and front output shafts. This is an OEM part. Keywords NP261XHD NP 261 XHD
261XHD 261 XHD Transfer Case Front 1/2 GM Chevy Duramax or 8.1 Gas Manual Shift 1999-2007
$750.00
- SKU: 21943
- Brand: New Venture
- Weight: 14.0
- Shipping: Calculated at checkout
Out of stock
Weight | 14.0 lbs |
---|---|
Dimensions | 20 × 12 × 12 in |
Be the first to review “261XHD 261 XHD Transfer Case Front 1/2 GM Chevy Duramax or 8.1 Gas Manual Shift 1999-2007”
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
GM/Chevy | 2500 | 1999 - 2000 |
GM/Chevy | 2500 | 2001 - 2002 |
GM/Chevy | 2500 | 2003 - 2004 |
GM/Chevy | 2500 | 2005 - 2006 |
GM/Chevy | 2500 | 2007 |
GM/Chevy | 3500 | 1999 - 2000 |
GM/Chevy | 3500 | 2001 - 2002 |
GM/Chevy | 3500 | 2003 - 2004 |
GM/Chevy | 3500 | 2005 - 2006 |
GM/Chevy | 3500 | 2007 |
Related products
Transfer Case Parts
This range fork fits all versions of the 263 GM transfer case including 263XHD. This is the updated fork for use with the 43681 range slider with the wider groove for the shift fork. If your transfer case is 2002 or older you may have to update the slider as well. This fork does not [...]
View DetailsTransfer Case Parts
GM NP261HD and NP263HD GM Transfer Case Chain Chevy 1999-2007
This Morse chain fits mots 261HD and 263HD GM transfer cases. It is 1 1/2″ wide and 49 links. Be sure to check your chain before ordering as I have seen the HV072 or HV074 chains in these units.
View DetailsTransfer Case Parts
This aluminum mode fork fits all GM 261 and 263 transfer cases. This fork has built in fork pads and is ready to install.
View DetailsTransfer Case Parts
This is the outer synchronizer ring for a 261 or 263 GM transfer case. This is the outside ring part of a 3 piece synchronizer pack.
View DetailsTransfer Case Parts
29 Spline Input Shaft 241DHD/241DLD Transfer Case Dodge 241 Wide Bearing
This 29 spline input shaft fits all 241 Dodge transfer cases including 241DLD and 241DHD with the fine tooth planetaries (1995 and newer). It is set up for the wide (BD50-8 or N5210KLB) bearing. We also have a 29 spline input for 241DHD only with the narrow input bearing (110L or 6010N) if you prefer. [...]
View DetailsTransfer Case Parts
This Morse chain fits 261XHD (manual shift), and 263XHD (electric shift) transfer cases found in GM trucks with the 8.1 gas or Duramax diesel engine and ZF 6 speed transmission or Allison automatic transmission.
View DetailsThis bearing and seal kit fits all 261 & 263 GM transfer cases from 1999-2007, except the XHD versions found behind the 8.1 or Duramax engines. They are very complete including all the seals and bearings as well as input/planetary thrust washers and fork inserts for the 263 and a transfer case mounting gasket.
View DetailsTransfer Case Parts
27 spline female coupler used between GM 205 transfer case and TH350 or 700R4 automatic
27 spline female coupler used between GM automatic transmissions and New Process 205 gear driven transfer case. Typically used with turbo 350 or 700R4.
View Details
Reviews
There are no reviews yet.