4X4 Front Axle Closed Knuckle Wiper Seal Kit For All 8 Bolt Small Ball Knuckles. Includes Felts, Rubber Seal, Outer Steel Retainers. Mounting Hardware. 1 Side Only. 2 kits needed per truck. These extremely hard to find Closed Knuckle and King Pin parts are now available directly from Dana Spicer. These were used in Jeep, Dodge, International, Ford, and GM applications with the small knuckles.
4X4 Front Axle Dana Spicer 25 27 44 Closed Knuckle Wiper Seal Kit Jeep International Dodge GM
$50.00
- SKU: 706207X
- Brand: Dana/Spicer
- Weight: 2.0
- Shipping: Calculated at checkout
8 in stock
Weight | 2.0 lbs |
---|---|
Dimensions | 6 × 4 × 2 in |
Be the first to review “4X4 Front Axle Dana Spicer 25 27 44 Closed Knuckle Wiper Seal Kit Jeep International Dodge GM”
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
Jeep | CJ5 | 1960 - 1961 |
Jeep | CJ5 | 1962 - 1963 |
Jeep | CJ5 | 1964 - 1965 |
Jeep | CJ5 | 1966 - 1967 |
Jeep | CJ5 | 1968 |
Jeep | CJ7 | 1960 - 1961 |
Jeep | CJ7 | 1962 - 1963 |
Jeep | CJ7 | 1964 - 1965 |
Jeep | CJ7 | 1966 - 1967 |
Jeep | CJ7 | 1968 |
Related products
This is a genuine AAM rear hub snap ring that holds the outer bearing in the hub on a full floating 2011 or newer GM 10.5 or 11.5 rear axle. This snap ring measures 3 7/8″ O.D.
View DetailsSmall Parts & Seals
Ford Straight Front Axle Tube Dust Seal 1998.5-2005 Dana 50 & 60
This genuine Dana axle tube dust seal fits 1998.5-2005 Ford F250 and F350 dana 50 and 60 straight front axles. This seal is marked FORSHEDA 11 10.060 D768-11 50381.These are approx. 3.125″ outside diameter, which is smaller than the later ones. This seal goes on the axle itself right behind the u-joint at the end [...]
View DetailsSmall Parts & Seals
This is a genuine AAM rear pinion seal that fits 1998 and newer GM trucks and SUV’s with either the 7.6 or 8.0 rear end. This is for the yoke with the factory wear sleeve on it.
View DetailsThis is a genuine AAM pinion nut that fits the 11.5 rear differential found in 3/4 and 1 ton GM & Dodge trucks. We also have the washer (40003255) available for this nut. This nut also fits the 10.5 Dodge rear differential. We use a 1 7/16″ 12 point socket on these, but it may [...]
View DetailsSmall Parts & Seals
Ford Straight Front Axle Steering Knuckle Seal 1998.5-2005 Dana 50 & 60
This is a genuine Dana front steering knuckle seal that fits 1998.5-2005 Ford F250 & F350 with either a Dana 50 or Dana 60 straight front axle. The seal is marked FRESHEDA 5H-15052 A085824 RDS 81. This seal measures approx. 4.46″ outside diameter
View DetailsSmall Parts & Seals
This is a genuine AAM pinion nut washer found on GM & Dodge 3/4 and 1 ton trucks. This is to be used with nut part number 40003027.
View DetailsSmall Parts & Seals
This is a Dana 80 pinion yoke that mostly shows to fit Ford applications with the 1480 series u-joints. May have to remove the tin dust shield for seal clearance.
View DetailsSmall Parts & Seals
GM 7.5/7.6 Rear Axle C-Clip S10 Camaro Chevrolet 10 Bolt 7 1/2″
This is a genuine AAM c-clip for the GM 7.5/7.6 rear axle found in S10’s, Malibu’s, Camaro’s etc. These are copper colored steel. These are for both open and limited slip style carriers. 2 required per vehicle.
View Details
Reviews
There are no reviews yet.