417-862-4455
1999-2007 Aluminum Rear Case 1/2 fits 149, 246, 261, and 263 GM LD or HD Transfer Chevy 5.3 6.0
$130.00
- SKU: 30603
- Brand: Motive Gear
- Weight: 10.0
- Shipping: Calculated at checkout
This is an aluminum aftermarket rear case that fits all the 149 and 246 GM transfer cases and the 261 and 263 GM LD or HD transfer cases. It is a direct replacement for the factory case 1/2, and is much harder than the factory part. This case eliminates the problem of the oil pump wearing through the case and does not require or need any sort of “case saver”. This also replaces part number 30961.
| Weight | 10.0 lbs |
|---|---|
| Dimensions | 6 × 4 × 2 in |
1 review for 1999-2007 Aluminum Rear Case 1/2 fits 149, 246, 261, and 263 GM LD or HD Transfer Chevy 5.3 6.0
Add a review
You must be logged in to post a review.
| Make | Model | Year |
|---|---|---|
| GM/Chevy | 1500 | 1999 - 2000 |
| GM/Chevy | 1500 | 2001 - 2002 |
| GM/Chevy | 1500 | 2003 - 2004 |
| GM/Chevy | 1500 | 2005 - 2006 |
| GM/Chevy | 1500 | 2007 |
| GM/Chevy | 2500 | 1999 - 2000 |
| GM/Chevy | 2500 | 2001 - 2002 |
| GM/Chevy | 2500 | 2003 - 2004 |
| GM/Chevy | 2500 | 2005 - 2006 |
| GM/Chevy | 2500 | 2007 |
Related products
Transfer Case Parts
263 GM Transfer Case Range Slider Updated Wide Groove 263HD 263XHD
This range slider fits all versions of the 263 GM transfer case including 263XHD. This is the updated slider with the wide groove. To be used with the 41819 range fork.
View Details
Transfer Case Parts
This Morse chain fits all NP246 GM transfer cases and most 261LD GM tranfer cases. It is 1 1/4″ wide and has 49 links.
View Details
Transfer Case Parts
261 & 263 GM transfer case middle synchronizer ring fiber lined.
This is the middle synchronizer ring for a 261 or 263 GM transfer case. It is 1 of 3 parts that make up the synchronizer pack.
View Details
Transfer Case Parts
This range fork fits all versions of the 263 GM transfer case including 263XHD. This is the updated fork for use with the 43681 range slider with the wider groove for the shift fork. If your transfer case is 2002 or older you may have to update the slider as well. This fork does not [...]
View Details
Small Parts & Seals
271 & 273 Dodge Transfer Case Large Booted Rear Seal 271D 273D 2003+
This is the large booted seal for the rear of a 271 or 273 Dodge transfer case with a rear slip yoke. The New Venture part number is 38249. These are almost impossible to get at your local auto parts store. These are used with the 45379 rear bushing. This seal can also be used [...]
View Details
Bearing Kits
This bearing and seal kit fits all 261 & 263 GM transfer cases except the XHD versions found behind the 8.1 or Duramax engines. They are very complete including all the seals and bearings as well as input/planetary thrust washers and fork inserts for the 263 and a transfer case mounting gasket.
View Details
Transfer Case Parts
This transfer case sprocket is used in both Ford and Dodge 271 and 273 units. Both sprockets are the same in these units.
View Details
Transfer Case Parts
This is the hub that splines into the sprocket and synchronizer clutch and rides on the mainshaft of the transfer case on a 261 or 263 GM. This one is made to use the seperate synchronizer clutch. Be sure that yours is made like this as some were a 1 piece design with the synchronizer [...]
View Details
Brian Z –
Got this pretty fast the price was rite fit perfectly fix my pump rub problem defiantly buy from this company again.THANKS