This is a brand new boot with clamps for the front output shaft on GM transfer cases including 149, 246, 261, and 263. This boot seals the splines where the front driveshaft connects to the transfer case.
BOOT SEAL KIT WITH CLAMPS 149 246 261 263 GM CHEVY TRANSFER CASE TO FRONT DRIVESHAFT
$11.00
- SKU: 40022504
- Brand: AAM American Axle Manufacturing
- Weight: .40
- Shipping: Calculated at checkout
Weight | .40 lbs |
---|---|
Dimensions | 6 × 4 × 2 in |
Be the first to review “BOOT SEAL KIT WITH CLAMPS 149 246 261 263 GM CHEVY TRANSFER CASE TO FRONT DRIVESHAFT”
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
GM/Chevy | 1500 | 1999 - 2000 |
GM/Chevy | 1500 | 2001 - 2002 |
GM/Chevy | 1500 | 2003 - 2004 |
GM/Chevy | 1500 | 2005 - 2006 |
GM/Chevy | 1500 | 2007 - 2008 |
GM/Chevy | 1500 | 2009 - 2010 |
GM/Chevy | 1500 | 2011 - 2012 |
GM/Chevy | 1500 | 2013 - 2014 |
GM/Chevy | 1500 | 2015 |
GM/Chevy | 2500 | 1999 - 2000 |
GM/Chevy | 2500 | 2001 - 2002 |
GM/Chevy | 2500 | 2003 - 2004 |
GM/Chevy | 2500 | 2005 - 2006 |
GM/Chevy | 2500 | 2007 - 2008 |
GM/Chevy | 2500 | 2009 - 2010 |
GM/Chevy | 2500 | 2011 - 2012 |
GM/Chevy | 2500 | 2013 - 2014 |
GM/Chevy | 2500 | 2015 |
GM/Chevy | 3500 | 1999 - 2000 |
GM/Chevy | 3500 | 2001 - 2002 |
GM/Chevy | 3500 | 2003 - 2004 |
GM/Chevy | 3500 | 2005 - 2006 |
GM/Chevy | 3500 | 2007 - 2008 |
GM/Chevy | 3500 | 2009 - 2010 |
GM/Chevy | 3500 | 2011 - 2012 |
GM/Chevy | 3500 | 2013 - 2014 |
GM/Chevy | 3500 | 2015 |
Related products
Small Parts & Seals
This is a genuine AAM rear pinion seal that fits 1998 and newer GM trucks and 2003 and newer Dodge trucks with either the 10.5 or 11.5 rear end. This is for the yoke with the factory wear sleeve on it
View DetailsSmall Parts & Seals
GM 8.6 Pinion Yoke Sleeve Seal 1999+ Chevrolet 10 Bolt 1/2 Ton 3/4 GM9.5 14 Bolt Trucks & SUVs
This is a genuine AAM pinion yoke sleeve that fits 1999 and newer GM 1/2 ton trucks also some 1998 model Suburban and Tahoe. This sleeve goes on the yoke and the pinion seal seals against it. We have also found on some yokes you can simply remove this sleeve and used the earlier National [...]
View DetailsSmall Parts & Seals
This is a genuine Dana pinion nut that fits all Dana 80 rear differentials. This nut uses an 1 7/8″ socket to remove and install it. Some yokes require a very thin wall socket. The newest Dana part number for this yoke is 2001855.
View DetailsSmall Parts & Seals
GM 9.5 Rear Pinion Yoke Seal 1998+ AAM 3/4 ton Truck Dodge 4X4 Front 2500 3500 9.25 Front 2003+
This is a genuine AAM rear pinion seal that fits 1998 and newer GM trucks and SUV’s with either the 9.5 rear end. This is for the yoke with the factory wear sleeve on it. This also fits Dodge 3/4 and 1 ton 4X4 trucks 2003 and newer with the AAM 9.25 front axle. These [...]
View DetailsThis is a genuine AAM pinion nut that fits the 11.5 rear differential found in 3/4 and 1 ton GM & Dodge trucks. We also have the washer (40003255) available for this nut. This nut also fits the 10.5 Dodge rear differential. We use a 1 7/16″ 12 point socket on these, but it may [...]
View DetailsSmall Parts & Seals
Ford Straight Front Axle Tube Dust Seal 1998.5-2005 Dana 50 & 60
This genuine Dana axle tube dust seal fits 1998.5-2005 Ford F250 and F350 dana 50 and 60 straight front axles. This seal is marked FORSHEDA 11 10.060 D768-11 50381.These are approx. 3.125″ outside diameter, which is smaller than the later ones. This seal goes on the axle itself right behind the u-joint at the end [...]
View DetailsSmall Parts & Seals
This is a genuine Dana 80 pinion yoke for the 1410 series u-joint. This fits all Dana 80’s including Chevy, Ford, and Dodge. Some applications may require removal of tin dust shield for seal clearance.
View DetailsSmall Parts & Seals
This is a genuine AAM pinion nut washer found on GM & Dodge 3/4 and 1 ton trucks. This is to be used with nut part number 40003027.
View Details
Reviews
There are no reviews yet.