This is a genuine AAM pinion yoke sleeve that fits 1999 and newer GM 1/2 ton trucks also some 1998 model Suburban and Tahoe. This sleeve goes on the yoke and the pinion seal seals against it. We have also found on some yokes you can simply remove this sleeve and used the earlier National 2043 pinion seal that will seal right on the yoke surface. This was also used on the 3/4 ton trucks with the 9.5 differential with the 14 bolt cover.
GM 8.6 Pinion Yoke Sleeve Seal 1999+ Chevrolet 10 Bolt 1/2 Ton 3/4 GM9.5 14 Bolt Trucks & SUVs
$6.31
- SKU: 26060975
- Brand: AAM American Axle Manufacturing
- Weight: .25
- Shipping: Calculated at checkout
Weight | .25 lbs |
---|---|
Dimensions | 6 × 4 × 2 in |
Be the first to review “GM 8.6 Pinion Yoke Sleeve Seal 1999+ Chevrolet 10 Bolt 1/2 Ton 3/4 GM9.5 14 Bolt Trucks & SUVs” Cancel reply
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
GM/Chevy | 1500 | 1999 - 2000 |
GM/Chevy | 1500 | 2001 - 2002 |
GM/Chevy | 1500 | 2003 - 2004 |
GM/Chevy | 1500 | 2005 - 2006 |
GM/Chevy | 1500 | 2007 - 2008 |
GM/Chevy | 1500 | 2009 - 2010 |
GM/Chevy | 1500 | 2011 - 2012 |
GM/Chevy | 1500 | 2013 - 2014 |
GM/Chevy | 1500 | 2015 - 2016 |
GM/Chevy | 1500 | 2017 |
GM/Chevy | Suburban | 1999 - 2000 |
GM/Chevy | Suburban | 2001 - 2002 |
GM/Chevy | Suburban | 2003 - 2004 |
GM/Chevy | Suburban | 2005 - 2006 |
GM/Chevy | Suburban | 2007 - 2008 |
GM/Chevy | Suburban | 2009 - 2010 |
GM/Chevy | Suburban | 2011 - 2012 |
GM/Chevy | Suburban | 2013 - 2014 |
GM/Chevy | Suburban | 2015 - 2016 |
GM/Chevy | Suburban | 2017 |
GM/Chevy | Tahoe | 1999 - 2000 |
GM/Chevy | Tahoe | 2001 - 2002 |
GM/Chevy | Tahoe | 2003 - 2004 |
GM/Chevy | Tahoe | 2005 - 2006 |
GM/Chevy | Tahoe | 2007 - 2008 |
GM/Chevy | Tahoe | 2009 - 2010 |
GM/Chevy | Tahoe | 2011 - 2012 |
GM/Chevy | Tahoe | 2013 - 2014 |
GM/Chevy | Tahoe | 2015 - 2016 |
GM/Chevy | Tahoe | 2017 |
Related products
Small Parts & Seals
This genuine Dana pinion nut washer that fits all Dana 80 rear ends. This goes with the 37082 nut.
View DetailsSmall Parts & Seals
2003+ Dodge Ram 3500 Dual Dually Rear Wheel Hub Seal 11.5 AAM
This is a genuine rear wheel hub seal for 2003 and newer Dodge 1 ton trucks with either the 11.5 rear axle and dual rear wheels. This part number is actually on the seal itself.
View DetailsSmall Parts & Seals
This is a genuine AAM rear pinion seal that fits 1998 and newer GM trucks and 2003 and newer Dodge trucks with either the 10.5 or 11.5 rear end. This is for the yoke with the factory wear sleeve on it
View DetailsSmall Parts & Seals
This is a genuine Dana 80 pinion yoke for the 1410 series u-joint. This fits all Dana 80’s including Chevy, Ford, and Dodge. Some applications may require removal of tin dust shield for seal clearance.
View DetailsSmall Parts & Seals
GM 10 12 Bolt 8.5/8.6 Ford 8.8 Rear Axle C-Clip 8.875 Chevrolet Car Truck
This is a genuine AAM c-clip for the GM 8.5/8.6 10 bolt and 8.875 12 bolt also Ford 8.8 rear axles. These are copper colored steel c-clips. 2 required per vehicle.
View DetailsSmall Parts & Seals
Ford Straight Front Axle Tube Dust Seal 1998.5-2005 Dana 50 & 60
This genuine Dana axle tube dust seal fits 1998.5-2005 Ford F250 and F350 dana 50 and 60 straight front axles. This seal is marked FORSHEDA 11 10.060 D768-11 50381.These are approx. 3.125″ outside diameter, which is smaller than the later ones. This seal goes on the axle itself right behind the u-joint at the end [...]
View DetailsThis is a genuine AAM pinion nut that fits the 11.5 rear differential found in 3/4 and 1 ton GM & Dodge trucks. We also have the washer (40003255) available for this nut. We use a 1 7/16″ 12 point socket on these, but it may actually be a 36mm.
View DetailsSmall Parts & Seals
These axle tube seals fit 2003+ Dodge Ram 2500/3500 series 4X4 front ends with the 9.25 front axle. This is an AAM part. These are sold individually.
View Details
Reviews
There are no reviews yet.