417-862-4455
Borg Warner Ford Transfer Case Tail Bushing Tailshaft 1356 4406 F150 F250 F350
$12.00
- SKU: 1356127001
- Brand: Borg Warner
- Weight: .30
- Shipping: Calculated at checkout
This is an aftermarket tailshaft bushing for the Borg Warner transfer case found in Ford pickup. This includes the 1356 and 4406 transfer cases found in 1987-2006.
| Weight | .30 lbs |
|---|---|
| Dimensions | 6 × 6 × 2 in |
General Inquiries
There are no inquiries yet.
Related products
This bearing and seal kit fits all 261 & 263 GM transfer cases from 1999-2007, except the XHD versions found behind the 8.1 or Duramax engines. They are very complete including all the seals and bearings as well as input/planetary thrust washers and fork inserts for the 263 and a transfer case mounting gasket.
View Details
Transfer Case Parts
This is the hub that splines into the sprocket and synchronizer clutch and rides on the mainshaft of the transfer case on a 261 or 263 GM. This one is made to use the seperate synchronizer clutch. Be sure that yours is made like this as some were a 1 piece design with the synchronizer [...]
View Details
Transfer Case Parts
GM NP261HD and NP263HD GM Transfer Case Chain Chevy 1999-2007
This Morse chain fits mots 261HD and 263HD GM transfer cases. It is 1 1/2″ wide and 49 links. Be sure to check your chain before ordering as I have seen the HV072 or HV074 chains in these units.
View Details
Transfer Case Parts
Aluminum range fork fits 231-241-242-261 New Process transfer cases Chevy Dodge Jeep
This aluminum range shift fork fits many transfer case applications including 231’s 241’s 242’s and 261,s. This parts number is cast on most factory forks and replaces the earlier fork cast 16976.
View Details
Small Parts & Seals
271 & 273 Dodge Transfer Case Large Booted Rear Seal 271D 273D 2003+
This is the large booted seal for the rear of a 271 or 273 Dodge transfer case with a rear slip yoke. The New Venture part number is 38249. These are almost impossible to get at your local auto parts store. These are used with the 45379 rear bushing. This seal can also be used [...]
View Details
Transfer Case Parts
This transfer case sprocket is used in both Ford and Dodge 271 and 273 units. Both sprockets are the same in these units.
View Details
Transfer Case Parts
This is the inner most ring for a 261 or 263 GM transfer case. It is part of a 3 piece synchronizer pack.
View Details
Transfer Case Parts
This range hub fits all 241DHD transfer cases with the PTO opening on the side of the transmission. This is used with 17520 snap ring and 17522 range collar.
View Details