417-862-4455
Cast Iron Tailhousing Transfer Case Adapter Dodge diesel NV4500 5 Speed Transmission
$100.00
- SKU: 26705
- Brand: Pro Active
- Weight: 30.0
- Shipping: Calculated at checkout
This is a cast iron tailhousing that fits a NV4500 5 speed transmission in the Dodge diesel trucks. This is much heavier that the factory aluminum piece and is a direct bolt on replacement. These have the 2 threaded holes on the side for the transfer case shifter, so they will fit all years.
| Weight | 30.0 lbs |
|---|---|
| Dimensions | 6 × 4 × 2 in |
1 review for Cast Iron Tailhousing Transfer Case Adapter Dodge diesel NV4500 5 Speed Transmission
Add a review
You must be logged in to post a review.
| Make | Model | Year |
|---|---|---|
| Dodge Ram | 2500 | 1994 - 1995 |
| Dodge Ram | 2500 | 1996 - 1997 |
| Dodge Ram | 2500 | 1998 - 1999 |
| Dodge Ram | 2500 | 2000 - 2001 |
| Dodge Ram | 2500 | 2002 - 2003 |
| Dodge Ram | 3500 | 1994 - 1995 |
| Dodge Ram | 3500 | 1996 - 1997 |
| Dodge Ram | 3500 | 1998 - 1999 |
| Dodge Ram | 3500 | 2000 - 2001 |
| Dodge Ram | 3500 | 2002 - 2003 |
Related products
Transmission Parts
Inner Synchronizer ring NV5600 Dodge diesel 6 speed transmission updated
This synchronizer ring fits all the later (2002 & up) NV5600 transmission found in the Dodge diesel trucks. 22760 is our part number, but some suppliers use a part number 44548. There are 7 of these in 1 transmission and they are all the same.
View Details
Transmission Parts
NV4500 cluster assembly early up to 1996 Dodge and GM 5:61 ratio
This cluster fits 1992-1996 Dodge and most GM NV4500 transmissions with the 22 tooth input shaft and 5:61 ratio.
View Details
Transmission Parts
This input shaft fits all Dodge NV5600 6 speed transmissions with the 1 3/8″ clutch spline. It is made for use with the updated synchronizer rings.
View Details
Transmission Parts
Stock replacement front bearing retainer Dodge diesel and V10 NV4500 transmission
This is a stock replacement front bearing retainer for the NV4500 transmissions found in the Dodge diesel or V10 gas trucks. Fits all years with stock inputs.
View Details
This front bearing retainer fits NV4500 Dodge diesel with the aftermarket big 1 3/8″ input shafts. Still uses stock throwout bearing.
View Details
Transmission Parts
Input shaft T56 Camaro/Firebird LS1 6 speed Tremec transmission
This input shaft fits all T56 Camaro and Firebird applications with the LS1 engine from 1998-2002. It has 31 teeth and is 10.62 inches long. This is an aftermarket shaft from Pro-Active gear. We have used a lot of their parts and have had really good results.
View Details
This bearing and seal kit fits all NV5600 dodge transmissions and includes all the tapered bearing and races and seals. It does not include any of the caged needle bearings. They are available in a seperate needle bearing kit.
View Details
Transmission Parts
NV4500 cluster assembly 1997 and newer GM and Dodge w/short idler.
This is a complete cluster gear assembly for the 1997 and newer NV4500 transmissions in GM and Dodge trucks with the short idler gear. Note the smallest set of teeth run all the way back to the rear bearing.
View Details
Anonymous –
tail housing fit perfectly. very pleased with the service. excellent people to work with.i will be back if i need more parts that they provide.