This is a genuine Dana/Spicer front hub seal for the Dana 44 or corporate 10 bolt 4X4 front axle found in 1978-1987 K10 and K20 trucks, and 1978-1991 fullsize Blazers and Suburbans. This is the same as a National 471271 seal.
Chevy GM Dana 44 4X4 Front Wheel Bearing Seal 1978-1991 Corporate 10 Bolt K10 K20 Blazer Suburban
$2.95
- SKU: 36366
- Brand: Dana/Spicer
- Weight: .30
- Shipping: Calculated at checkout
Weight | .30 lbs |
---|---|
Dimensions | 3 × 3 × 1 in |
Related products
Small Parts & Seals
Ford Straight Front Axle Tube Dust Seal 1998.5-2005 Dana 50 & 60
This genuine Dana axle tube dust seal fits 1998.5-2005 Ford F250 and F350 dana 50 and 60 straight front axles. This seal is marked FORSHEDA 11 10.060 D768-11 50381.These are approx. 3.125″ outside diameter, which is smaller than the later ones. This seal goes on the axle itself right behind the u-joint at the end [...]
View DetailsSmall Parts & Seals
This is a genuine AAM pinion yoke sleeve that fits 1999 and newer GM 3/4 and 1 ton trucks with either a 10.5 or 11.5 ring gear. This sleeve goes on the yoke and the pinion seal seals against it. We have also found on some yokes you can simply remove this sleeve and used [...]
View DetailsSmall Parts & Seals
Ford Straight 4X4 Front Axle Tube Dust Seal 2006+ Dana 50 & 60 F250 F350
This genuine Dana axle tube dust seal fits 2006 and newer Ford F250 and F350 dana 50 and 60 straight front axles. This seal is marked FES 5M-15197 and 53877. These are approx. 3.450″ outside diameter, which is larger than the earlier ones. This seal goes on the axle itself right behind the u-joint at [...]
View DetailsSmall Parts & Seals
This is a Dana 80 pinion yoke that mostly shows to fit Ford applications with the 1480 series u-joints. May have to remove the tin dust shield for seal clearance.
View DetailsSmall Parts & Seals
Dodge Dana 44 & 60 Front Outer Stub Axle Castle Nut Also AAM 9.25 Spindle 4X4
This genuine Dana axle nut fits all Dodge front axles including Dana 44 & 60 and the AAM 9.25 found in 2003+ trucks. This is a castle nut. We also have the washer available. This is the same part as AAM 40010627.
View DetailsThis is a genuine AAM rear hub snap ring that holds the outer bearing in the hub on a full floating 2011 or newer GM 10.5 or 11.5 rear axle. This snap ring measures 3 7/8″ O.D.
View DetailsSmall Parts & Seals
GM 10 12 Bolt 8.5/8.6 Ford 8.8 Rear Axle C-Clip 8.875 Chevrolet Car Truck
This is a genuine AAM c-clip for the GM 8.5/8.6 10 bolt and 8.875 12 bolt also Ford 8.8 rear axles. These are copper colored steel c-clips. 2 required per vehicle.
View DetailsSmall Parts & Seals
This is a genuine AAM rear pinion seal that fits 1998 to 2014 GM trucks and SUV’s with 8.6 rear end with the 10 bolt cover. This is for the yoke with the factory wear sleeve on it.
View Details