417-862-4455
Ford F350 Rear Axle Flange O-Ring Dana 80 Hub 35 Spline
$2.75
- SKU: 47893
- Brand: Dana/Spicer
- Weight: .10
- Shipping: Calculated at checkout
This is a genuine Dana/Spicer o-ring for the rear axle flange on some Ford F350 trucks. These are for the 35 spline axles. These also work on the 10.25 or 10.5 rear axles. This is the o-ring that seals the axle to the hub.
| Weight | .10 lbs |
|---|---|
| Dimensions | 1 × 1 × 1 in |
General Inquiries
There are no inquiries yet.
Related products
This is a genuine AAM rear hub snap ring that holds the outer bearing in the hub on a full floating 2011 or newer GM 10.5 or 11.5 rear axle. This snap ring measures 3 7/8″ O.D.
View Details
Small Parts & Seals
This is a genuine rear wheel hub seal for 2011 and newer GM 3/4 and 1 ton trucks with either the 10.5 or 11.5 rear axle and single or dual rear wheels. This part number is actually on the seal itself.
View Details
Small Parts & Seals
Ford Straight Front Axle Steering Knuckle Seal 1998.5-2005 Dana 50 & 60
This is a genuine Dana front steering knuckle seal that fits 1998.5-2005 Ford F250 & F350 with either a Dana 50 or Dana 60 straight front axle. The seal is marked FRESHEDA 5H-15052 A085824 RDS 81. This seal measures approx. 4.46″ outside diameter
View Details
Small Parts & Seals
Ford Straight Front Axle Steering Knuckle Seal 2006+ Dana 50 & 60
This is a genuine Dana front steering knuckle seal that fits 2006 and newer Ford F250 & F350 with either a Dana 50 or Dana 60 straight front axle. The seal is marked SKF 2017426 DANA. This seal measures approx. 5.48″ outside diameter. The original part number was 2017426.
View Details
Small Parts & Seals
This is the outer axle nut washer that goes with the 46085 axle nut on 4X4 Dodge front axles, this fits Dana 44 and 60 as well as the AAM 9.25 front axle found in 2003 and newer Dodge Ram 2500 and 3500 series trucks.
View Details
Small Parts & Seals
Ford Straight Front Axle Tube Dust Seal 1998.5-2005 Dana 50 & 60
This genuine Dana axle tube dust seal fits 1998.5-2005 Ford F250 and F350 dana 50 and 60 straight front axles. This seal is marked FORSHEDA 11 10.060 D768-11 50381.These are approx. 3.125″ outside diameter, which is smaller than the later ones. This seal goes on the axle itself right behind the u-joint at the end [...]
View Details
Small Parts & Seals
This is a Dana 80 pinion yoke that mostly shows to fit Ford applications with the 1480 series u-joints. May have to remove the tin dust shield for seal clearance.
View Details
Small Parts & Seals
Ford Dana 50 & 60 Front Axle Tube Seals 1998.5 Up 4X4 Straight F250 F350 Super Duty
These Ford axle tube seals show to fit 1998.5 and up F250 & F350 with either the Dana 50 or Dana 60 straight front axle. These are the style seal that spin inside themselves. The new part number for these seals is 2019816.
View Details