417-862-4455
Dana 30 35 44 Jeep Ford 4X4 Front Axle Disconnect Shift Fork
$15.00
- SKU: 42585
- Brand: Dana/Spicer
- Weight: 1.0
- Shipping: Calculated at checkout
This is a genuine Dana/Spicer shift fork that fits many applications including Jeep Cherokee and Ford Explorer with the disconnect 4X4 front axle. This is an aluminum fork with a casting number 42610. This fork uses the 621059 fork pads (sold separately).
| Weight | 1.0 lbs |
|---|---|
| Dimensions | 6 × 4 × 4 in |
General Inquiries
There are no inquiries yet.
Related products
Miscellaneous
This is a genuine AAM pinion flange yoke for the 10.5 and 11.5 14 bolt rear differential found in 2003+ Dodge 3/4 and 1 ton trucks. This is used with the 26064030 pinion seal. It already has the wear sleeve on the seal surface. This replaces the perfectly square ones found on some early models [...]
View Details
This is a genuine AAM rear hub nut for the later model GM trucks with either the 10.5 or 11.5 rear differential. This is the 9 pin nut as opposed to the earlier 6 pin design. This nut uses a retainer (40096297) that snaps onto the nut to hold the key (40082234) in place under [...]
View Details
This is a genuine AAM ring gear bolt for the GM 14 bolt 10.5 rear differential. This is the shorter bolt for 4:10, 3:73, 3:42, and 3:21 ratios. The AAM part number is 40019486. Price is each. If you purchase more than 1, (12 required) we will refund for combined shipping after your purchase.
View Details
Miscellaneous
Ford Dana 80, M300 & 10.25 10.5 Rear Axle Ratchet Hub Nut Ratcheting Spindle 2″ Right RH Thread F350
This is a genuine Dana ratchet style hub nut used on the Ford F350 Dana 80, M300 or 10.25 and 10.5 rear full floating axles. This one has right hand threads. This is the same as Dorman 615-133.
View Details
This is a genuine AAM rear hub nut retainer for the later model GM trucks with either the 10.5 or 11.5 rear differential. This is for the 9 pin nut as opposed to the earlier 6 pin design. This retainer snaps onto the nut (40091019) to hold the key (40082234) in place under the nut.
View Details
This is a genuine AAM pinion nut that fits the 11.5 rear differential found in 3/4 and 1 ton GM & Dodge trucks. We also have the washer (40003255) available for this nut. This nut also fits the 10.5 Dodge rear differential. We use a 1 7/16″ 12 point socket on these, but it may [...]
View Details
This is a genuine AAM front axle disconnect kit for 2001 and newer 3/4 and 1 ton GM 4X4 trucks with the 9.25IFS front differential. This kit includes the actuator and most wear items associated with the front differential.
View Details
Miscellaneous
Dana 70 80 Rear Hub Nut Nylon Lock 2″ 16 TPI 2 9/16″ Socket Full Float Dodge, Ford, GM
This is an aftermarket rear hub nut for use on Dana 70 and 80 rear axles with 2″ 16 threads per inch. This is the style that uses a wedge key that drives in a keyway on the top of the spindle and cuts through the nylon part of this nut. This nut is right [...]
View Details