This is a genuine Dana/Spicer pinion yoke that fits the older Dana 30/44 axles. This yoke uses u-bolts to hold the u-joint (2-94-28X). These were used in 1970’s and 1980’s domestic trucks with a Dana 44 front or rear axle.
Dana 30/44 1310 Yoke 26 Spline GM Ford Jeep U-Bolt Style U-Joint
$67.00
- SKU: 2-4-8091X
- Brand: Dana/Spicer
- Weight: 2.0
- Shipping: Calculated at checkout
1 in stock
| Weight | 2.0 lbs |
|---|---|
| Dimensions | 4 × 4 × 6 in |
General Inquiries
There are no inquiries yet.
Related products
This is a genuine AAM pinion yoke with the balancer for the GM 3/4 and 1 ton trucks with the 11.5 rear differential 1999 and newer. This is for the 1480 or 1485 series u-joint. Can also be used on the 14 bolt 10.5 rear differentials.
View DetailsThis is a genuine AAM driveshaft flange yoke that shows to fit 2003+ Dodge Ram trucks with the 1485 series universal joints. This is the yoke that mates with the 40062272 pinion flange. Please be aware that the 40055983A casting number is the same on both the 1415 and 1485 series yokes.
View DetailsThis is a genuine AAM rear pinion yoke for the GM trucks with the 14 bolt 9.5 differential. These were in the light 3/4 trucks and has c-clips on the axles. These are for the 1350 series u-joint. This is the later style yoke with the sleeve on the seal surface. This can also be [...]
View DetailsThis is a genuine Dana pinion yoke flange for a Dana 80 in a Ford truck. The Ford part number was BC3Z4851B. If you aren’t sure of your part number feel free to contact us with your differential tag number and we can check for you.
View DetailsThis is a genuine AAM driveshaft flange yoke that fits the rear driveline where it bolts to the rear pinion flange. This is for the 1555 series universal joint. This mates with the 40062272 4 bolt pinion flange.
View DetailsMiscellaneous
GM 14 Bolt 10.5/11.5 Rear End Pinion Yoke Differential Full Float 1410 1415 Series U-Joint
This is an aftermarket Powertrain Industries pinion yoke for a 14 bolt with the 10.5″ or 11.5″ ring gear in a GM truck. This is the late style yoke with the sleeve on the seal surface. Can be used on all year trucks from 1973-current as long as you use the late pinion seal (26064030) [...]
View DetailsThis is a genuine AAM front driveshaft flange yoke for the 4X4 front driveshaft found in 2003 and newer Dodge Ram 2500 and 3500 series trucks. This yoke is serrated and made to mate with the serrated front pinion yoke.
View DetailsThis is a genuine AAM driveshaft flange yoke that shows to fit 2006+ Dodge Ram 2500 and 3500 series trucks with the 1415 series universal joints. This is the yoke that mates with the 40062272 pinion flange. Please note that the 40055983A casting number is the same on the 1485 series yoke as well.
View Details
417-862-4455





