417-862-4455
Chevy GM 27 Spline Slip Yoke TH350 700R4 4L60 Transmission 2wd 3R/1344 Saginaw U-Joint T5
$75.00
- SKU: 07812557
- Brand: AAM American Axle Manufacturing
- Weight: 3.0
- Shipping: Calculated at checkout
This is a genuine AAM slip yoke that fits many GM 2wd transmissions. This yoke has 27 splines and is 5.5″ from the center of the joint to the end. This is for the 3r or 1344 Saginaw u-joint. These yokes used melted plastic to hold the original u-joint in place. They now use inside snap rings.
| Weight | 3.0 lbs |
|---|---|
| Dimensions | 13 × 4 × 2 in |
General Inquiries
There are no inquiries yet.
Related products
This is a genuine Dana pinion yoke flange for a Dana 80 in a Ford truck. The Ford part number was BC3Z4851B. If you aren’t sure of your part number feel free to contact us with your differential tag number and we can check for you.
View Details
Miscellaneous
This is a genuine AAM pinion flange yoke for the 10.5 and 11.5 14 bolt rear differential found in 2003+ Dodge 3/4 and 1 ton trucks. This is used with the 26064030 pinion seal. It already has the wear sleeve on the seal surface. This replaces the perfectly square ones found on some early models [...]
View Details
This is a genuine AAM pinion yoke that fits all GM 7.5/7.6/8.0 rear differentials. These were found in S10’s, Camaro’s, and Trailblazers. This is the later style yoke with the wear sleeve made on it, so you will have to use the 1998+ pinion seal. This is for the 1344 or 3R series u-joint with [...]
View Details
This is a genuine AAM 1410 series rear pinion yoke for the GM 9.5 rear differential. This can also be used on the 8.5/8.6 10 bolt rear differential found in the 1/2 trucks form 1981-current. This is the later style yoke with the wear sleeve on the seal surface so you must use the late [...]
View Details
This is a genuine AAM serrated front differential flanged yoke that fits 2003-2012 Dodge 3/4 and 1 ton trucks with the 9.25 AAM 4X4 front axle assembly. This fits the 9.25 with the 14 bolt cover. The Dodge part number is 5086696AC.
View Details
Small Parts & Seals
This is a genuine Dana 80 pinion yoke for the 1410 series u-joint. This fits all Dana 80’s including Chevy, Ford, and Dodge. Some applications may require removal of tin dust shield for seal clearance.
View Details
This is a genuine Dana/Spicer u-joint bolt and strap kit for the GM cars and trucks with the 3R or 1344 Saginaw series pinion yoke. The Saginaw uses inside snap rings to keep the u-joint centered in the yoke. Kit includes 2 straps and 4 bolts.
View Details
This is a genuine AAM rear pinion yoke for use on the early 1997 and older GM 8.5 10 bolt. This is for the Saginaw 3R series u-joint with the inside snap ring and no tabs on the yoke. This is for use with a National 2043 pinion seal and can be used on 1998 [...]
View Details