417-862-4455
Dana 44 Bare Differential Carrier 3:73 and Lower Numerically GM Chevy Ford Dodge Jeep
$205.00
- SKU: 706024X
- Brand: Dana/Spicer
- Weight: 13.0
- Shipping: Calculated at checkout
2 in stock
This is a genuine Dana/Spicer bare differential carrier for a standard Dana 44. These were used in many domestic applications from the 1970’s to 1990’s, including GM, Chevy, Dodge, Ford, and Jeep. This one is for gear ratio’s 3:73 and down numerically (3:54, 3:31, etc.). This carrier comes with a set of ring gear bolts, side differential shims, and a roll pin for the cross pin.
| Weight | 13.0 lbs |
|---|---|
| Dimensions | 12 × 12 × 12 in |
General Inquiries
There are no inquiries yet.
Related products
Cases & Spiders
Dana 44 Dodge 9.25 Clutch Pack Track Lok 1968-2010 C9.25 Posi Track 708203 Differential
This is a genuine Dana clutch pack for a Dana 44 Trac Lok differential or a Dodge with a 9.25 rear posi track differential. The new Dana part number is 708203, but we still use the original part number 706352X. This fits 9.25 Dodge rear ends from 1968-2010. It does not fit 2011+ Dodge 9.25ZF [...]
View Details
Dana 70/80 Trac-Loc Clutches Dana 70 and Dana 80; Includes Clutches And Steels; Includes Clutches For Both Side Gears Dana Spicer Dana 70/80 Trac-Loc Clutches 702009 Locking Differential Clutch Pack. The new Dana part number is 2003819, but we still stock it under the original part number 702009.
View Details
Cases & Spiders
This is a genuine Dana clutch pack for a Dana 60 Trac Lok differential. This kit includes enough clutches to do both sides.
View Details
This is a genuine AAM axle gear/internal kit for the Dodge 9.25 front end found in 2007 and newer 3/4 and 1 ton trucks. Please note the smaller pinion gears are rounded where they contact the carrier and use thin thrust washers. From 2003-2006 Dodge used the same internal kit as the GM trucks which [...]
View Details
This is a genuine Dana 35 clutch pack for a Track Lok differential in a Jeep. This kit includes enough clutches to do both sides. This kit will also fit the Dodge 8.25 rear differential with a Track Lok differential.
View Details
Cases & Spiders
This is a genuine AAM loaded open differential carrier assembly that fit the GM 7.6 or 7 5/8″ rear differential with 28 spline axles and 3:23 or numerically higher (3:42, 3:73, etc.). These were used in early 1990’s and newer S10’s and Camaro’s.
View Details
This is a genuine AAM spider gear kit that fits GM trucks with the 9.25 front or 9.5 rear 14 bolt 33 spline open differentials. These are for all years in GM applications and from 2003-2006 in Dodge 3/4 and 1 ton front differentials. Note that the small pinion gears are flat and use 1/4″ [...]
View Details
Cases & Spiders
GM9.25 IFS & 9.5 Rear Differential Bare Carrier Also Dodge 9.25 Front 2003-2006 AAM Axle
This is a genuine AAM open differential carrier for the GM 92.5IFS or 9.5 rear axle, also for the 9.25 straight front axle found in 2003-2006 3/4 and 1 ton Dodge Ram trucks. This is set up for the spider gears that are flat where the contact the carrier.
View Details