This is a genuine Dana/Spicer nut for the steering knuckle to the spindle. This fits Dana 44 and GM corporate 4X4 front axles. These are 3/8″-24 fine thread, and are a crimped lock nut. These go with the 36326-2 studs.
Dana 44 Corporate 10 Bolt 4X4 Front Axle Spindle Bolt Stud Nut Steering Knuckle GM Ford Dodge Jeep
$0.25
- SKU: 35704
- Brand: Dana/Spicer
- Weight: .10
- Shipping: Calculated at checkout
Weight | .10 lbs |
---|---|
Dimensions | 1 × 1 × 1 in |
Related products
Small Parts & Seals
This is a genuine Dana pinion nut that fits all Dana 80 rear differentials. This nut uses an 1 7/8″ socket to remove and install it. Some yokes require a very thin wall socket. The newest Dana part number for this yoke is 2001855.
View DetailsThis is a genuine AAM rear hub snap ring that holds the outer bearing in the hub on a full floating 2011 or newer GM 10.5 or 11.5 rear axle. This snap ring measures 3 7/8″ O.D.
View DetailsSmall Parts & Seals
This is a genuine AAM pinion yoke sleeve that fits 1999 and newer GM 3/4 and 1 ton trucks with either a 10.5 or 11.5 ring gear. This sleeve goes on the yoke and the pinion seal seals against it. We have also found on some yokes you can simply remove this sleeve and used [...]
View DetailsSmall Parts & Seals
GM 7.5/7.6 Rear Axle C-Clip S10 Camaro Chevrolet 10 Bolt 7 1/2″
This is a genuine AAM c-clip for the GM 7.5/7.6 rear axle found in S10’s, Malibu’s, Camaro’s etc. These are copper colored steel. These are for both open and limited slip style carriers. 2 required per vehicle.
View DetailsSmall Parts & Seals
Ford Straight Front Axle Steering Knuckle Seal 2006+ Dana 50 & 60
This is a genuine Dana front steering knuckle seal that fits 2006 and newer Ford F250 & F350 with either a Dana 50 or Dana 60 straight front axle. The seal is marked SKF 2017426 DANA. This seal measures approx. 5.48″ outside diameter. The original part number was 2017426.
View DetailsThis is a genuine AAM pinion nut that fits the 11.5 rear differential found in 3/4 and 1 ton GM & Dodge trucks. We also have the washer (40003255) available for this nut. This nut also fits the 10.5 Dodge rear differential. We use a 1 7/16″ 12 point socket on these, but it may [...]
View DetailsSmall Parts & Seals
GM 9.5 Rear Pinion Yoke Seal 1998+ AAM 3/4 ton Truck Dodge 4X4 Front 2500 3500 9.25 Front 2003+
This is a genuine AAM rear pinion seal that fits 1998 and newer GM trucks and SUV’s with either the 9.5 rear end. This is for the yoke with the factory wear sleeve on it. This also fits Dodge 3/4 and 1 ton 4X4 trucks 2003 and newer with the AAM 9.25 front axle. These [...]
View DetailsSmall Parts & Seals
Ford Straight Front Axle Steering Knuckle Seal 1998.5-2005 Dana 50 & 60
This is a genuine Dana front steering knuckle seal that fits 1998.5-2005 Ford F250 & F350 with either a Dana 50 or Dana 60 straight front axle. The seal is marked FRESHEDA 5H-15052 A085824 RDS 81. This seal measures approx. 4.46″ outside diameter
View Details