This is a genuine AAM c-clip for the GM 7.5/7.6 rear axle found in S10’s, Malibu’s, Camaro’s etc. These are copper colored steel. These are for both open and limited slip style carriers. 2 required per vehicle.
GM 7.5/7.6 Rear Axle C-Clip S10 Camaro Chevrolet 10 Bolt 7 1/2″
$2.25
- SKU: 344171
- Brand: AAM American Axle Manufacturing
- Weight: .25
- Shipping: Calculated at checkout
Weight | .25 lbs |
---|---|
Dimensions | 6 × 4 × 2 in |
Be the first to review “GM 7.5/7.6 Rear Axle C-Clip S10 Camaro Chevrolet 10 Bolt 7 1/2″”
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
GM/Chevy | Camaro | 1985 - 1986 |
GM/Chevy | Camaro | 1987 - 1988 |
GM/Chevy | Camaro | 1989 - 1990 |
GM/Chevy | Camaro | 1991 - 1992 |
GM/Chevy | Camaro | 1993 - 1994 |
GM/Chevy | Camaro | 1995 - 1996 |
GM/Chevy | Camaro | 1997 - 1998 |
GM/Chevy | Camaro | 1999 - 2000 |
GM/Chevy | Camaro | 2001 - 2002 |
GM/Chevy | Camaro | 2003 |
GM/Chevy | S10 | 1985 - 1986 |
GM/Chevy | S10 | 1987 - 1988 |
GM/Chevy | S10 | 1989 - 1990 |
GM/Chevy | S10 | 1991 - 1992 |
GM/Chevy | S10 | 1993 - 1994 |
GM/Chevy | S10 | 1995 - 1996 |
GM/Chevy | S10 | 1997 - 1998 |
GM/Chevy | S10 | 1999 - 2000 |
GM/Chevy | S10 | 2001 - 2002 |
GM/Chevy | S10 | 2003 |
GM/Chevy | S15 | 1985 - 1986 |
GM/Chevy | S15 | 1987 - 1988 |
GM/Chevy | S15 | 1989 - 1990 |
GM/Chevy | S15 | 1991 - 1992 |
GM/Chevy | S15 | 1993 - 1994 |
GM/Chevy | S15 | 1995 - 1996 |
GM/Chevy | S15 | 1997 - 1998 |
GM/Chevy | S15 | 1999 - 2000 |
GM/Chevy | S15 | 2001 - 2002 |
GM/Chevy | S15 | 2003 |
Related products
Small Parts & Seals
This is a genuine Dana 80 pinion yoke for the 1410 series u-joint. This fits all Dana 80’s including Chevy, Ford, and Dodge. Some applications may require removal of tin dust shield for seal clearance.
View DetailsSmall Parts & Seals
Ford Straight Front Axle Tube Dust Seal 1998.5-2005 Dana 50 & 60
This genuine Dana axle tube dust seal fits 1998.5-2005 Ford F250 and F350 dana 50 and 60 straight front axles. This seal is marked FORSHEDA 11 10.060 D768-11 50381.These are approx. 3.125″ outside diameter, which is smaller than the later ones. This seal goes on the axle itself right behind the u-joint at the end [...]
View DetailsSmall Parts & Seals
This genuine Dana pinion nut washer that fits all Dana 80 rear ends. This goes with the 37082 nut.
View DetailsSmall Parts & Seals
GM 8.6 Pinion Yoke Sleeve Seal 1999+ Chevrolet 10 Bolt 1/2 Ton 3/4 GM9.5 14 Bolt Trucks & SUVs
This is a genuine AAM pinion yoke sleeve that fits 1999 and newer GM 1/2 ton trucks also some 1998 model Suburban and Tahoe. This sleeve goes on the yoke and the pinion seal seals against it. We have also found on some yokes you can simply remove this sleeve and used the earlier National [...]
View DetailsSmall Parts & Seals
271 & 273 Dodge Transfer Case Large Booted Rear Seal 271D 273D 2003+
This is the large booted seal for the rear of a 271 or 273 Dodge transfer case with a rear slip yoke. The New Venture part number is 38249. These are almost impossible to get at your local auto parts store. These are used with the 45379 rear bushing. This seal can also be used [...]
View DetailsSmall Parts & Seals
This is a genuine AAM crush sleeve for the 11.5 rear differential found in GM and Dodge 3/4 & 1 ton trucks.
View DetailsThis is a genuine AAM pinion nut that fits the 11.5 rear differential found in 3/4 and 1 ton GM & Dodge trucks. We also have the washer (40003255) available for this nut. This nut also fits the 10.5 Dodge rear differential. We use a 1 7/16″ 12 point socket on these, but it may [...]
View DetailsThis is a genuine AAM rear hub snap ring that holds the outer bearing in the hub on a full floating 2011 or newer GM 10.5 or 11.5 rear axle. This snap ring measures 3 7/8″ O.D.
View Details
Reviews
There are no reviews yet.