This is a genuine Dana/Spicer Trac Lok differential for a Dana 60 with 35 spline axles. This comes with a set of ring gear bolts, side bearings, and inboard and outboard shims. This fits many application including most 4X4 front axles.
Dana 60 35 Spline Posi Track Differential Trac Lok Carrier Assembly Chevy Ford Dodge 4:10 and Down 3:54 3:73
$550.00
- SKU: 707163X
- Brand: Dana/Spicer
- Weight: 40.0
- Shipping: Calculated at checkout
Weight | 40.0 lbs |
---|---|
Dimensions | 12 × 12 × 12 in |
Related products
Transmission Parts
This mainshaft fits all NV5600 2wd Dodge diesel 6 speed transmission. The box has a Dodge part number 05010049AA for reference. This is an aftermarket part. We have been using the same supplier on these for over 5 years without an issue.
View DetailsThis bearing and seal kit fits all G56 Dodge diesel 6 speed manual transmissions. It includes all the tapered bearings and races and seals. It does not include any caged needle bearings for underneath the gears on the mainshaft.
View DetailsTransmission Parts
This 4X4 mainshaft fits all NV5600 Dodge diesel 6 speed transmissions. It also has a Dodge part number on the box for reference 05010050AA. This is an aftermarket part and we have used the same supplier for more than 5 years without any issues.
View DetailsTransmission Parts
NV4500 cluster assembly 1997 and newer GM and Dodge w/short idler.
This is a complete cluster gear assembly for the 1997 and newer NV4500 transmissions in GM and Dodge trucks with the short idler gear. Note the smallest set of teeth run all the way back to the rear bearing.
View DetailsThis front bearing retainer fits NV4500 Dodge diesel with the aftermarket big 1 3/8″ input shafts. Still uses stock throwout bearing.
View DetailsTransmission Parts
1 3/8″ input shaft Dodge diesel and V10 NV4500 transmission 5 speed
This input shaft fits the NV4500 Dodge transmissions used behind the diesel or V10 gas engines. This is the larger 1 3/8″ clutch spline found on some aftermarket or factory 6 speed clutches.
View DetailsTransmission Parts
Input shaft T56 Camaro/Firebird LS1 6 speed Tremec transmission
This input shaft fits all T56 Camaro and Firebird applications with the LS1 engine from 1998-2002. It has 31 teeth and is 10.62 inches long. This is an aftermarket shaft from Pro-Active gear. We have used a lot of their parts and have had really good results.
View DetailsTransmission Parts
Shifter Shift Boot G56 Dodge diesel 6 speed transmission Orange
This shifter boot fits the G56 6 speed transmission found in Dodge diesel trucks.
View Details