417-862-4455
Shifter Shift Boot G56 Dodge diesel 6 speed transmission Orange
$17.50
- SKU: G56-86
- Brand: Pro Active
- Weight: .30
- Shipping: Calculated at checkout
This shifter boot fits the G56 6 speed transmission found in Dodge diesel trucks.
| Weight | .30 lbs |
|---|---|
| Dimensions | 6 × 4 × 2 in |
1 review for Shifter Shift Boot G56 Dodge diesel 6 speed transmission Orange
Add a review
You must be logged in to post a review.
| Make | Model | Year |
|---|---|---|
| Dodge Ram | 2500 | 2005 - 2006 |
| Dodge Ram | 2500 | 2007 - 2008 |
| Dodge Ram | 2500 | 2009 - 2010 |
| Dodge Ram | 2500 | 2011 - 2012 |
| Dodge Ram | 2500 | 2013 - 2014 |
| Dodge Ram | 2500 | 2015 |
| Dodge Ram | 3500 | 2005 - 2006 |
| Dodge Ram | 3500 | 2007 - 2008 |
| Dodge Ram | 3500 | 2009 - 2010 |
| Dodge Ram | 3500 | 2011 - 2012 |
| Dodge Ram | 3500 | 2013 - 2014 |
| Dodge Ram | 3500 | 2015 |
General Inquiries
There are no inquiries yet.
Related products
Transmission Parts
This first gear fits all NV5600 Dodge diesel 6 speed transmissions. If you have an early (2001 & older) transmission you will have to use the updated lined synchronizer ring. There is a Dodge part number on the box for reference 05019907AA. This is an aftermarket part. We have used the same supplier for over [...]
View Details
Transmission Parts
Inner Synchronizer ring NV5600 Dodge diesel 6 speed transmission updated
This synchronizer ring fits all the later (2002 & up) NV5600 transmission found in the Dodge diesel trucks. 22760 is our part number, but some suppliers use a part number 44548. There are 7 of these in 1 transmission and they are all the same.
View Details
Transmission Parts
NV4500 cluster assembly 1997 and newer GM and Dodge w/short idler.
This is a complete cluster gear assembly for the 1997 and newer NV4500 transmissions in GM and Dodge trucks with the short idler gear. Note the smallest set of teeth run all the way back to the rear bearing.
View Details
Transmission Parts
This 4X4 mainshaft fits all NV5600 Dodge diesel 6 speed transmissions. It also has a Dodge part number on the box for reference 05010050AA. This is an aftermarket part and we have used the same supplier for more than 5 years without any issues.
View Details
Transmission Parts
This syncro ring kit fits Ford ZF 5 speeds 1996 and later S5-47. This set has 6 rings.
View Details
This front bearing retainer fits NV4500 Dodge diesel with the aftermarket big 1 3/8″ input shafts. Still uses stock throwout bearing.
View Details
Transmission Parts
1 3/8″ input shaft Dodge diesel and V10 NV4500 transmission 5 speed
This input shaft fits the NV4500 Dodge transmissions used behind the diesel or V10 gas engines. This is the larger 1 3/8″ clutch spline found on some aftermarket or factory 6 speed clutches.
View Details
This bearing and seal kit fits all Dodge NV4500 transmissions and GM NV4500 transmissions with the external slave cylinder up to 1995. This kit has all the seals, tapered bearings and races as well as the mainshaft pilot and thrust bearing and countershaft front plug. This kit does not include the caged needle bearings underneath [...]
View Details
Anonymous –
Material seems to be identical to the OEM boot I removed. Installed easily. All went together fine.