This is a genuine Dana clutch pack for a Dana 60 or 61 Trac Lok differential. This kit includes enough clutches to do both sides.
Dana 60 61 Trac Lok Differential Clutch Pack Posi Limited Slip
$95.00
- SKU: 707083X
- Brand: Dana/Spicer
- Weight: 4.0
- Shipping: Calculated at checkout
Weight | 4.0 lbs |
---|---|
Dimensions | 6 × 4 × 2 in |
Be the first to review “Dana 60 61 Trac Lok Differential Clutch Pack Posi Limited Slip”
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
Ford | F250 | 1979 - 1980 |
Ford | F250 | 1981 - 1982 |
Ford | F250 | 1983 - 1984 |
Ford | F250 | 1985 - 1986 |
Ford | F250 | 1987 - 1988 |
Ford | F250 | 1989 - 1990 |
Ford | F250 | 1991 - 1992 |
Ford | F250 | 1993 - 1994 |
Ford | F250 | 1995 - 1996 |
Ford | F250 | 1997 - 1998 |
Ford | F250 | 1999 - 2000 |
Ford | F250 | 2001 - 2002 |
Ford | F250 | 2003 - 2004 |
Ford | F250 | 2005 - 2006 |
Ford | F250 | 2007 - 2008 |
Ford | F250 | 2009 - 2010 |
Ford | F250 | 2011 - 2012 |
Ford | F250 | 2013 - 2014 |
Related products
Small Parts & Seals
This is a genuine Dana pinion nut that fits all Dana 80 rear differentials. This nut uses an 1 7/8″ socket to remove and install it. Some yokes require a very thin wall socket.
View DetailsSmall Parts & Seals
GM 8.6 Pinion Yoke Sleeve Seal 1999+ Chevrolet 10 Bolt 1/2 Ton 3/4 GM9.5 14 Bolt Trucks & SUVs
This is a genuine AAM pinion yoke sleeve that fits 1999 and newer GM 1/2 ton trucks also some 1998 model Suburban and Tahoe. This sleeve goes on the yoke and the pinion seal seals against it. We have also found on some yokes you can simply remove this sleeve and used the earlier National [...]
View DetailsThis is a genuine AAM rear hub snap ring that holds the outer bearing in the hub on a full floating 2011 or newer GM 10.5 or 11.5 rear axle. This snap ring measures 3 7/8″ O.D.
View DetailsSmall Parts & Seals
This is a genuine AAM rear pinion seal that fits 1998 and newer GM trucks and SUV’s with either the 7.6 or 8.0 rear end. This is for the yoke with the factory wear sleeve on it.
View DetailsSmall Parts & Seals
This is a genuine Dana 80 pinion yoke for the 1410 series u-joint. This fits all Dana 80’s including Chevy, Ford, and Dodge. Some applications may require removal of tin dust shield for seal clearance.
View DetailsSmall Parts & Seals
Dodge Dana 44 & 60 Front Outer Stub Axle Castle Nut Also AAM 9.25 Spindle 4X4
This genuine Dana axle nut fits all Dodge front axles including Dana 44 & 60 and the AAM 9.25 found in 2003+ trucks. This is a castle nut. We also have the washer available. This is the same part as AAM 40010627.
View DetailsSmall Parts & Seals
GM 10.5 11.5 Pinion Yoke Sleeve Seal 1999+ Chevrolet 14 Bolt 3/4 & 1 Ton Trucks
This is a genuine AAM pinion yoke sleeve that fits 1999 and newer GM 3/4 and 1 ton trucks with either a 10.5 or 11.5 ring gear. This sleeve goes on the yoke and the pinion seal seals against it. We have also found on some yokes you can simply remove this sleeve and used [...]
View DetailsSmall Parts & Seals
This genuine Dana pinion nut washer that fits all Dana 80 rear ends. This goes with the 37082 nut.
View Details
Reviews
There are no reviews yet.