This is a genuine Dana/Spicer outboard spacer kit for some Dana 60 and 70 applications. Note that not all Dana 60 or 70 applications use these.
Dana 60 70 Differential Side Bearing Outboard Race Spacers Chevy Ford Dodge GM
$8.58
- SKU: 701098X
- Brand: Dana/Spicer
- Weight: .25
- Shipping: Calculated at checkout
Weight | .25 lbs |
---|---|
Dimensions | 6 × 4 × 2 in |
Be the first to review “Dana 60 70 Differential Side Bearing Outboard Race Spacers Chevy Ford Dodge GM” Cancel reply
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
Dodge Ram | 2500 | 1994 - 1995 |
Dodge Ram | 2500 | 1996 - 1997 |
Dodge Ram | 2500 | 1998 - 1999 |
Dodge Ram | 2500 | 2000 - 2001 |
Dodge Ram | 2500 | 2002 |
Dodge Ram | 3500 | 1994 - 1995 |
Dodge Ram | 3500 | 1996 - 1997 |
Dodge Ram | 3500 | 1998 - 1999 |
Dodge Ram | 3500 | 2000 - 2001 |
Dodge Ram | 3500 | 2002 |
Related products
Small Parts & Seals
Ford Straight Front Axle Steering Knuckle Seal 1998.5-2005 Dana 50 & 60
This is a genuine Dana front steering knuckle seal that fits 1998.5-2005 Ford F250 & F350 with either a Dana 50 or Dana 60 straight front axle. The seal is marked FRESHEDA 5H-15052 A085824 RDS 81. This seal measures approx. 4.46″ outside diameter
View DetailsSmall Parts & Seals
This is a Dana 80 pinion yoke that mostly shows to fit Ford applications with the 1480 series u-joints. May have to remove the tin dust shield for seal clearance.
View DetailsSmall Parts & Seals
These axle tube seals fit 2003+ Dodge Ram 2500/3500 series 4X4 front ends with the 9.25 front axle. This is an AAM part. These are sold individually.
View DetailsSmall Parts & Seals
This is a genuine AAM pinion nut washer found on GM & Dodge 3/4 and 1 ton trucks. This is to be used with nut part number 40003027.
View DetailsSmall Parts & Seals
This genuine Dana pinion nut washer that fits all Dana 80 rear ends. This goes with the 37082 nut.
View DetailsThis is a genuine AAM pinion nut that fits the 11.5 rear differential found in 3/4 and 1 ton GM & Dodge trucks. We also have the washer (40003255) available for this nut. We use a 1 7/16″ 12 point socket on these, but it may actually be a 36mm.
View DetailsSmall Parts & Seals
This is a genuine Dana pinion nut that fits all Dana 80 rear differentials. This nut uses an 1 7/8″ socket to remove and install it. Some yokes require a very thin wall socket.
View DetailsSmall Parts & Seals
Ford Straight Front Axle Tube Dust Seal 1998.5-2005 Dana 50 & 60
This genuine Dana axle tube dust seal fits 1998.5-2005 Ford F250 and F350 dana 50 and 60 straight front axles. This seal is marked FORSHEDA 11 10.060 D768-11 50381.These are approx. 3.125″ outside diameter, which is smaller than the later ones. This seal goes on the axle itself right behind the u-joint at the end [...]
View Details
Reviews
There are no reviews yet.