417-862-4455
Dana 60 Spindle Nut Kit Chevy Ford GMC Dodge Dana 50 Ford 4 Nuts 2 Washer 4X4
$45.00
- SKU: 33721
- Brand: Dana/Spicer
- Weight: 1
- Shipping: Calculated at checkout
This is a complete set of genuine Dana/Spicer spindle nuts and washers for a Dana 60 front axle. It consists of 2 each 621027, 621028, and 660568. These were commonly found on GM, Ford, and Dodge applications. They were also used on Dana 50 applications in Ford applications. They are 2″ 16 threads per inch. This kit is also the same as Warn 33271 nut kit used to put lockouts on a Ford truck with factory automatic hubs.
| Weight | 1 lbs |
|---|
Reviews
There are no reviews yet.
| Make | Model | Year |
|---|---|---|
| Ford | F350 | 1973 - 1974 |
| Ford | F350 | 1975 - 1976 |
| Ford | F350 | 1977 - 1978 |
| Ford | F350 | 1979 - 1980 |
| Ford | F350 | 1981 - 1982 |
| Ford | F350 | 1983 - 1984 |
| Ford | F350 | 1985 - 1986 |
| Ford | F350 | 1987 - 1988 |
| Ford | F350 | 1989 - 1990 |
| Ford | F350 | 1991 - 1992 |
| Ford | F350 | 1993 - 1994 |
| Ford | F350 | 1995 - 1996 |
| Ford | F350 | 1997 - 1998 |
| GM/Chevy | K30 | 1970 - 1971 |
| GM/Chevy | K30 | 1972 - 1973 |
| GM/Chevy | K30 | 1974 - 1975 |
| GM/Chevy | K30 | 1976 - 1977 |
| GM/Chevy | K30 | 1978 - 1979 |
| GM/Chevy | K30 | 1980 - 1981 |
| GM/Chevy | K30 | 1982 - 1983 |
| GM/Chevy | K30 | 1984 - 1985 |
| GM/Chevy | K30 | 1986 - 1987 |
| GM/Chevy | K30 | 1988 - 1989 |
| GM/Chevy | K30 | 1990 - 1991 |
General Inquiries
There are no inquiries yet.
Inquiry
Related products
Small Parts & Seals
This is a Dana 80 pinion yoke that mostly shows to fit Ford applications with the 1480 series u-joints. May have to remove the tin dust shield for seal clearance.
View Details
This is a genuine Dana Spicer spindle for the Dana 44 4X4 front axle in 1/2 and 3/4 ton trucks, Blazers, and Suburbans from 1973-1976. This also comes with the dust seals, inner bearing, and plastic thrust washer.
View Details
Small Parts & Seals
These axle tube seals fit 2003+ Dodge Ram 2500/3500 series 4X4 front ends with the 9.25 front axle. This is an AAM part. These are sold individually.
View Details
This is a genuine Dana/Spicer 4X4 front spindle for Ford F350 trucks from 1978-1997 with the Dana 60 front axle. This kit includes the inner spindle bearing, thrust washer, and 2 rubber seals for the back side of the spindle.
View Details
This is a genuine Dana/Spicer 4X4 front spindle for the Dana 60 front axle found in 1980’s and early 1990’s GM and Dodge trucks. This kit includes inner spindle bearing, thrust washer, and the 2 rubber seals for the backside of the spindle. Photo shows spindle bearing installed, but they usually aren’t.
View Details
Small Parts & Seals
This is a genuine Dana pinion nut that fits all Dana 80 rear differentials. This nut uses an 1 7/8″ socket to remove and install it. Some yokes require a very thin wall socket.
View Details
Small Parts & Seals
Ford Straight Front Axle Tube Dust Seal 1998.5-2005 Dana 50 & 60
This genuine Dana axle tube dust seal fits 1998.5-2005 Ford F250 and F350 dana 50 and 60 straight front axles. This seal is marked FORSHEDA 11 10.060 D768-11 50381.These are approx. 3.125″ outside diameter, which is smaller than the later ones. This seal goes on the axle itself right behind the u-joint at the end [...]
View Details
This is a lower king pin bearing and seal kit for a Dana 60 4X4 front axle with the king pin setup. These were commonly found in GM, Ford, and Dodge applications from the early 1970’s to the mid 1990’s. This kit does one side. 2 kits required per truck.
View Details
Be the first to review “Dana 60 Spindle Nut Kit Chevy Ford GMC Dodge Dana 50 Ford 4 Nuts 2 Washer 4X4”
You must be logged in to post a review.