417-862-4455
Dana Spicer 1350 Yoke 21 Spline Driveline at Carrier Bearing
$95.00
- SKU: 3-4-10591-1
- Brand: Dana/Spicer
- Weight: 3.0
- Shipping: Calculated at checkout
1 in stock
- Series: 1350
- Spline Count: 21
- Spline Diameter: 1.403
- Hub Diameter: 2.000
- Thru Hole: 1.234
- Centerline To End: 2.953
- Style: BS
- Brand: Spicer
| Weight | 3.0 lbs |
|---|---|
| Dimensions | 6 × 6 × 6 in |
General Inquiries
There are no inquiries yet.
Related products
This is a genuine AAM male slip yoke for the front of a GM transfer case, such as 246, 261, or 263. This is for the front driveline where it slips into the transfer case. This is for the 3R or 1344 series universal joint.
View Details
This is a genuine AAM driveshaft flange yoke that shows to fit 2003+ Dodge Ram trucks with the 1485 series universal joints. This is the yoke that mates with the 40062272 pinion flange. Please be aware that the 40055983A casting number is the same on both the 1415 and 1485 series yokes.
View Details
This is a genuine AAM 1410 series rear pinion yoke for the GM 9.5 rear differential. This can also be used on the 8.5/8.6 10 bolt rear differential found in the 1/2 trucks form 1981-current. This is the later style yoke with the wear sleeve on the seal surface so you must use the late [...]
View Details
This is a genuine AAM pinion yoke that shows to fit GM trucks with either the 10.5 or 11.5 rear differential in a 1480/1485 series. These show to be used in 2010 and newer trucks, but can also be used for earlier applications when upgrading to the larger universal joints. This is also with a [...]
View Details
This is a genuine AAM rear pinion yoke for the GM trucks with the 14 bolt 9.5 differential. These were in the light 3/4 trucks and has c-clips on the axles. These are for the 1350 series u-joint. This is the later style yoke with the sleeve on the seal surface. This can also be [...]
View Details
This is a genuine AAM driveshaft flange yoke that shows to fit 2006+ Dodge Ram 2500 and 3500 series trucks with the 1415 series universal joints. This is the yoke that mates with the 40062272 pinion flange. Please note that the 40055983A casting number is the same on the 1485 series yoke as well.
View Details
Miscellaneous
GM 14 Bolt 10.5/11.5 Rear End Pinion Yoke Differential Full Float 1410 1415 Series U-Joint
This is an aftermarket Powertrain Industries pinion yoke for a 14 bolt with the 10.5″ or 11.5″ ring gear in a GM truck. This is the late style yoke with the sleeve on the seal surface. Can be used on all year trucks from 1973-current as long as you use the late pinion seal (26064030) [...]
View Details
This is a genuine AAM pinion yoke with the balancer for the GM 3/4 and 1 ton trucks with the 11.5 rear differential 1999 and newer. This is for the 1480 or 1485 series u-joint. Can also be used on the 14 bolt 10.5 rear differentials.
View Details