417-862-4455
NEW PROCESS 203/205 TRANSFER CASE 1410 SERIES END YOKE 32 SPLINE Ford Dodge GM
$89.95
- SKU: 3-4-10951-1
- Brand: Dana/Spicer
- Weight: 3.0
- Shipping: Calculated at checkout
3 in stock
|
This is a brand new genuine Dana 1410 series yoke for the 203 or 205 New Process transfer case with a 32 spline output shaft. This yoke uses bolts and straps to hold the u-joint. Please be sure that you need one for the 32 spline as some of these units were 30 Spline.
|
| Weight | 3.0 lbs |
|---|---|
| Dimensions | 6 × 6 × 6 in |
General Inquiries
There are no inquiries yet.
Related products
This is a genuine AAM pinion yoke that fits all GM 7.5/7.6/8.0 rear differentials. These were found in S10’s, Camaro’s, and Trailblazers. This is the later style yoke with the wear sleeve made on it, so you will have to use the 1998+ pinion seal. This is for the 1344 or 3R series u-joint with [...]
View Details
This is a genuine AAM driveshaft slip yoke for a 1555 series driveline in a 2006 and newer Dodge Ram 2500 or 3500 series truck. It measures 9.52756″ long (from center of u-joint) 2.29961″ O.D. (where it slips into the transfer case) and 1.74803″ 34 spline. This yoke has been discontinued from AAM and 40098344 [...]
View Details
This is a genuine AAM 1410 series rear pinion yoke for the GM 9.5 rear differential. This can also be used on the 8.5/8.6 10 bolt rear differential found in the 1/2 trucks form 1981-current. This is the later style yoke with the wear sleeve on the seal surface so you must use the late [...]
View Details
Small Parts & Seals
This is a Dana 80 pinion yoke that mostly shows to fit Ford applications with the 1480 series u-joints. May have to remove the tin dust shield for seal clearance.
View Details
Miscellaneous
This is a genuine AAM pinion flange yoke for the 10.5 and 11.5 14 bolt rear differential found in 2003+ Dodge 3/4 and 1 ton trucks. This is used with the 26064030 pinion seal. It already has the wear sleeve on the seal surface. This replaces the perfectly square ones found on some early models [...]
View Details
This is a genuine AAM driveshaft flange yoke that shows to fit 2003+ Dodge Ram trucks with the 1485 series universal joints. This is the yoke that mates with the 40062272 pinion flange. Please be aware that the 40055983A casting number is the same on both the 1415 and 1485 series yokes.
View Details
This is a genuine AAM slip yoke with a balancer that fits GM 4X4 1/2 ton trucks and SUV’s with the 246 transfer case and 1344 or 3R series universal joints. This slip yoke is 32 spline.
View Details
This is a genuine AAM rear pinion yoke for use on the early 1997 and older GM 8.5 10 bolt. This is for the Saginaw 3R series u-joint with the inside snap ring and no tabs on the yoke. This is for use with a National 2043 pinion seal and can be used on 1998 [...]
View Details