This is a genuine Dana/Spicer seal for the enclosed knuckle type axles found in early model (1960’S) GM, Dodge, Ford, and International trucks with the Dana 60 or larger knuckle 44 4X4 front axle. These are the larger 8″ diameter seals and they go with the 33663 retainers.
Dana Spicer Axle Oil Seal Enclosed 4X4 Knuckle 44 Front Ford Dodge GM International
$10.40
- SKU: 35261
- Brand: Dana/Spicer
- Weight: 1
- Shipping: Calculated at checkout
Out of stock
Weight | 1 lbs |
---|---|
Dimensions | 6 × 4 × 2 in |
Be the first to review “Dana Spicer Axle Oil Seal Enclosed 4X4 Knuckle 44 Front Ford Dodge GM International”
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
GM/Chevy | K10 | 1960 - 1961 |
GM/Chevy | K10 | 1962 - 1963 |
GM/Chevy | K10 | 1964 - 1965 |
GM/Chevy | K10 | 1966 - 1967 |
GM/Chevy | K10 | 1968 |
GM/Chevy | K20 | 1960 - 1961 |
GM/Chevy | K20 | 1962 - 1963 |
GM/Chevy | K20 | 1964 - 1965 |
GM/Chevy | K20 | 1966 - 1967 |
GM/Chevy | K20 | 1968 |
Jeep | CJ | 1960 - 1961 |
Jeep | CJ | 1962 - 1963 |
Jeep | CJ | 1964 - 1965 |
Jeep | CJ | 1966 - 1967 |
Jeep | CJ | 1968 |
Related products
Small Parts & Seals
GM 10 12 Bolt 8.5/8.6 Ford 8.8 Rear Axle C-Clip 8.875 Chevrolet Car Truck
This is a genuine AAM c-clip for the GM 8.5/8.6 10 bolt and 8.875 12 bolt also Ford 8.8 rear axles. These are copper colored steel c-clips. 2 required per vehicle.
View DetailsSmall Parts & Seals
Ford Straight 4X4 Front Axle Tube Dust Seal 2006+ Dana 50 & 60 F250 F350
This genuine Dana axle tube dust seal fits 2006 and newer Ford F250 and F350 dana 50 and 60 straight front axles. This seal is marked FES 5M-15197 and 53877. These are approx. 3.450″ outside diameter, which is larger than the earlier ones. This seal goes on the axle itself right behind the u-joint at [...]
View DetailsThis is a genuine AAM rear hub snap ring that holds the outer bearing in the hub on a full floating 2011 or newer GM 10.5 or 11.5 rear axle. This snap ring measures 3 7/8″ O.D.
View DetailsSmall Parts & Seals
This is a Dana 80 pinion yoke that mostly shows to fit Ford applications with the 1480 series u-joints. May have to remove the tin dust shield for seal clearance.
View DetailsSmall Parts & Seals
These axle tube seals fit 2003+ Dodge Ram 2500/3500 series 4X4 front ends with the 9.25 front axle. This is an AAM part. These are sold individually. The newest AAM part number for this seal is 40201742.
View DetailsSmall Parts & Seals
This is a genuine Dana 80 pinion yoke for the 1410 series u-joint. This fits all Dana 80’s including Chevy, Ford, and Dodge. Some applications may require removal of tin dust shield for seal clearance.
View DetailsSmall Parts & Seals
This genuine Dana pinion nut washer that fits all Dana 80 rear ends. This goes with the 37082 nut.
View DetailsSmall Parts & Seals
Ford Straight Front Axle Steering Knuckle Seal 2006+ Dana 50 & 60
This is a genuine Dana front steering knuckle seal that fits 2006 and newer Ford F250 & F350 with either a Dana 50 or Dana 60 straight front axle. The seal is marked SKF 2017426 DANA. This seal measures approx. 5.48″ outside diameter. The original part number was 2017426.
View Details
Reviews
There are no reviews yet.