This is a genuine Dana/Spicer rear wheel hub seal that fits most Dodge Ram trucks with the Dana 80 rear differential. This is the same as a National 455086 and the seal in the package is an SKF with a part number 30033. As always if you are unsure of the part number you need, you can email us with your differential tag number and we can tell for sure.
Dodge Dana 80 Rear Wheel Hub Seal
$21.25
- SKU: 35256
- Brand: Dana/Spicer
- Weight: .40
- Shipping: Calculated at checkout
| Weight | .40 lbs |
|---|---|
| Dimensions | 6 × 6 × 2 in |
General Inquiries
There are no inquiries yet.
Related products
Small Parts & Seals
This is the outer axle nut washer that goes with the 46085 axle nut on 4X4 Dodge front axles, this fits Dana 44 and 60 as well as the AAM 9.25 front axle found in 2003 and newer Dodge Ram 2500 and 3500 series trucks.
View DetailsSmall Parts & Seals
Ford Straight Front Axle Tube Dust Seal 1998.5-2005 Dana 50 & 60
This genuine Dana axle tube dust seal fits 1998.5-2005 Ford F250 and F350 dana 50 and 60 straight front axles. This seal is marked FORSHEDA 11 10.060 D768-11 50381.These are approx. 3.125″ outside diameter, which is smaller than the later ones. This seal goes on the axle itself right behind the u-joint at the end [...]
View DetailsSmall Parts & Seals
Dodge Dana 44 & 60 Front Outer Stub Axle Castle Nut Also AAM 9.25 Spindle 4X4
This genuine Dana axle nut fits all Dodge front axles including Dana 44 & 60 and the AAM 9.25 found in 2003+ trucks. This is a castle nut. We also have the washer available. This is the same part as AAM 40010627.
View DetailsSmall Parts & Seals
271 & 273 Dodge Transfer Case Large Booted Rear Seal 271D 273D 2003+
This is the large booted seal for the rear of a 271 or 273 Dodge transfer case with a rear slip yoke. The New Venture part number is 38249. These are almost impossible to get at your local auto parts store. These are used with the 45379 rear bushing. This seal can also be used [...]
View DetailsSmall Parts & Seals
These axle tube seals fit 2003+ Dodge Ram 2500/3500 series 4X4 front ends with the 9.25 front axle. This is an AAM part. These are sold individually. The newest AAM part number for this seal is 40201742.
View DetailsSmall Parts & Seals
GM 8.6 Pinion Yoke Sleeve Seal 1999+ Chevrolet 10 Bolt 1/2 Ton 3/4 GM9.5 14 Bolt Trucks & SUVs
This is a genuine AAM pinion yoke sleeve that fits 1999 and newer GM 1/2 ton trucks also some 1998 model Suburban and Tahoe. This sleeve goes on the yoke and the pinion seal seals against it. We have also found on some yokes you can simply remove this sleeve and used the earlier National [...]
View DetailsSmall Parts & Seals
GM 7.5/7.6 Rear Axle C-Clip S10 Camaro Chevrolet 10 Bolt 7 1/2″
This is a genuine AAM c-clip for the GM 7.5/7.6 rear axle found in S10’s, Malibu’s, Camaro’s etc. These are copper colored steel. These are for both open and limited slip style carriers. 2 required per vehicle.
View DetailsSmall Parts & Seals
GM 7.6 and 8.0 Rear Pinion Yoke Seal 1998+ AAM 7.25 S10 Camaro
This is a genuine AAM rear pinion seal that fits 1998 and newer GM trucks and SUV’s with either the 7.6 or 8.0 rear end. This is for the yoke with the factory wear sleeve on it. This also fits the later 7.25IFS with the wear sleeve on the yoke.
View Details
417-862-4455

