417-862-4455
Dana 60 70 80 Rear Wheel Hub Seal Dodge Ford
$9.50
- SKU: 47507
- Brand: Dana/Spicer
- Weight: .30
- Shipping: Calculated at checkout
4 in stock
This is a genuine Dana/Spicer rear hub seal that fits many common Ford and Dodge applications. The original Dana part number was 43146 or 39693. This is the same as a National 9864S and 417158 seal available at the local parts store.
| Weight | .30 lbs |
|---|---|
| Dimensions | 6 × 6 × 2 in |
General Inquiries
There are no inquiries yet.
Related products
Small Parts & Seals
This is a genuine rear wheel hub seal for 2011 and newer GM 3/4 and 1 ton trucks with either the 10.5 or 11.5 rear axle and single or dual rear wheels. This part number is actually on the seal itself.
View Details
Small Parts & Seals
2003+ Dodge Ram 3500 Dual Dually Rear Wheel Hub Seal 11.5 AAM
This is a genuine rear wheel hub seal for 2003 and newer Dodge 1 ton trucks with either the 11.5 rear axle and dual rear wheels. This part number is actually on the seal itself. The National seal part number is 710563.
View Details
Small Parts & Seals
GM 10 12 Bolt 8.5/8.6 Ford 8.8 Rear Axle C-Clip 8.875 Chevrolet Car Truck
This is a genuine AAM c-clip for the GM 8.5/8.6 10 bolt and 8.875 12 bolt also Ford 8.8 rear axles. These are copper colored steel c-clips. 2 required per vehicle.
View Details
Small Parts & Seals
Ford Straight Front Axle Steering Knuckle Seal 1998.5-2005 Dana 50 & 60
This is a genuine Dana front steering knuckle seal that fits 1998.5-2005 Ford F250 & F350 with either a Dana 50 or Dana 60 straight front axle. The seal is marked FRESHEDA 5H-15052 A085824 RDS 81. This seal measures approx. 4.46″ outside diameter
View Details
Small Parts & Seals
This genuine Dana pinion nut washer that fits all Dana 80 rear ends. This goes with the 37082 nut.
View Details
Small Parts & Seals
This is a genuine Dana pinion nut that fits all Dana 80 rear differentials. This nut uses an 1 7/8″ socket to remove and install it. Some yokes require a very thin wall socket. The newest Dana part number for this yoke is 2001855.
View Details
This is a genuine AAM rear hub snap ring that holds the outer bearing in the hub on a full floating 2011 or newer GM 10.5 or 11.5 rear axle. This snap ring measures 3 7/8″ O.D.
View Details
Small Parts & Seals
This is a genuine AAM pinion nut washer found on GM & Dodge 3/4 and 1 ton trucks. This is to be used with nut part number 40003027.
View Details