417-862-4455
Ford Dana 50 4X4 IFS Front Axle Lower Ball Joint 1980-1998 F250
$25.72
- SKU: 47183
- Brand: Dana/Spicer
- Weight: 3.0
- Shipping: Calculated at checkout
Out of stock
This is a genuine Dana/Spicer lower ball joint that shows to fit 1980-1998 Ford F250 4X4 trucks with the Dana 50 front axle. It comes “as pictured” and does not include a nut or snap ring.
| Weight | 3.0 lbs |
|---|---|
| Dimensions | 6 × 4 × 2 in |
Be the first to review “Ford Dana 50 4X4 IFS Front Axle Lower Ball Joint 1980-1998 F250”
You must be logged in to post a review.
| Make | Model | Year |
|---|---|---|
| Ford | F250 | 1980 - 1981 |
| Ford | F250 | 1982 - 1983 |
| Ford | F250 | 1984 - 1985 |
| Ford | F250 | 1986 - 1987 |
| Ford | F250 | 1988 - 1989 |
| Ford | F250 | 1990 - 1991 |
| Ford | F250 | 1992 - 1993 |
| Ford | F250 | 1994 - 1995 |
| Ford | F250 | 1996 - 1997 |
| Ford | F250 | 1998 |
General Inquiries
There are no inquiries yet.
Related products
This is a genuine AAM rear hub nut for the later model GM trucks with either the 10.5 or 11.5 rear differential. This is the 9 pin nut as opposed to the earlier 6 pin design. This nut uses a retainer (40096297) that snaps onto the nut to hold the key (40082234) in place under [...]
View Details
This is a genuine Dana Hydra Lok or Vari Lok limited slip differential plenum. This mounts on the side of the differential underneath the bearing. It is easy to damage the original part while removing the bearing.
View Details
This is a genuine Dana wedge shaped key that drives into the nylon part of the lock nut on a Dana 70 or 80 full floating rear axle found in Dodge, Ford, and GM trucks.
View Details
This is a genuine AAM tone ring for the Dodge 11.5 rear differential found in 3/4 and 1 ton trucks from 2003 to present. This fits on the differential carrier right next to the ring gear.
View Details
Miscellaneous
This is a genuine AAM rear hub nut for the GM & Dodge 14 bolt full floating rear axles. This includes the 10.5 and 11.5″ ring gears. This is a 6 pin nut that uses the internal key to keep it in place. We also have the keys and retainers for this setup.
View Details
Miscellaneous
Ford Dana 80, M300 & 10.25 10.5 Rear Axle Ratchet Hub Nut Ratcheting Spindle 2″ Right RH Thread F350
This is a genuine Dana ratchet style hub nut used on the Ford F350 Dana 80, M300 or 10.25 and 10.5 rear full floating axles. This one has right hand threads. This is the same as Dorman 615-133.
View Details
This is a genuine AAM front differential lock t-tab. This is the tab that locks the side adjusters in place. There are 2 required per differential. This style was used from 1988-2006. The GM part number was 3727182. We also have the round style for 2007+.
View Details
This is a genuine Dana tone ring for a Dana 70 rear differential. This works on both Ford and Dodge applications
View Details
Reviews
There are no reviews yet.