417-862-4455
Ford Dana 50 4X4 IFS Front Axle Upper Ball Joint 1980-1998 F250
$37.50
- SKU: 2001257
- Brand: Dana/Spicer
- Weight: 2.0
- Shipping: Calculated at checkout
This is a genuine Dana/Spicer upper ball joint that shows to fit 1980-1998 Ford F250 4X4 trucks with the Dana 50 front axle. It comes “as pictured” and does not include a nut or snap ring. The original Dana part number was 47184.
| Weight | 2.0 lbs |
|---|---|
| Dimensions | 6 × 4 × 2 in |
Be the first to review “Ford Dana 50 4X4 IFS Front Axle Upper Ball Joint 1980-1998 F250”
You must be logged in to post a review.
| Make | Model | Year |
|---|---|---|
| Ford | F250 | 1980 - 1981 |
| Ford | F250 | 1982 - 1983 |
| Ford | F250 | 1984 - 1985 |
| Ford | F250 | 1986 - 1987 |
| Ford | F250 | 1988 - 1989 |
| Ford | F250 | 1990 - 1991 |
| Ford | F250 | 1992 - 1993 |
| Ford | F250 | 1994 - 1995 |
| Ford | F250 | 1996 - 1997 |
| Ford | F250 | 1998 |
Related products
Miscellaneous
Ford Dana 80 & 10.25 10.5 Rear Axle Ratchet Hub Nut Ratcheting Spindle 2″ Right RH Thread
This is a genuine Dana ratchet style hub nut used on the Ford Dana 80 or 10.25 and 10.5 rear full floating axles. This one has right hand threads.
View Details
This is a genuine AAM rear hub nut retainer for the later model GM or Dodge trucks with either the 10.5 or 11.5 rear differential. This is for the 9 pin nut as opposed to the earlier 6 pin design. This retainer snaps onto the nut (40091019) to hold the key (40082234) in place under [...]
View Details
Miscellaneous
Dana 70 80 Rear Hub Nut Nylon Lock 2″ 16 TPI 2 9/16″ Socket Full Float Dodge, Ford, GM
This is an aftermarket rear hub nut for use on Dana 70 and 80 rear axles with 2″ 16 threads per inch. This is the style that uses a wedge key that drives in a keyway on the top of the spindle and cuts through the nylon part of this nut. This nut is right [...]
View Details
This is a genuine Dana tone ring for a Dana 70 rear differential. This works on both Ford and Dodge applications
View Details
This is a genuine AAM differential cover gasket that fits both GM and Dodge trucks with the 11.5 rear differential. We have the weight listed as 2 lbs. because it will ship in a fairly large box.
View Details
Miscellaneous
This is a genuine AAM pinion flange yoke for the 10.5 and 11.5 14 bolt rear differential found in 2003+ Dodge 3/4 and 1 ton trucks. This is used with the 26064030 pinion seal. It already has the wear sleeve on the seal surface. This replaces the perfectly square ones found on some early models [...]
View Details
This is a genuine AAM front axle disconnect kit for 2001 and newer 3/4 and 1 ton GM 4X4 trucks with the 9.25IFS front differential. This kit includes the actuator and most wear items associated with the front differential.
View Details
This is a genuine Dana Hydra Lok or Vari Lok limited slip differential plenum. This mounts on the side of the differential underneath the bearing. It is easy to damage the original part while removing the bearing.
View Details
Reviews
There are no reviews yet.