417-862-4455
Ford F150 Transfer Case Slip Yoke 1350 4X4 1987-2019 31 Spline
$105.00
- SKU: 3-3-3931X
- Brand: Dana/Spicer
- Weight: 3.20
- Shipping: Calculated at checkout
1 in stock
This is a genuine Dana/Spicer slip yoke for use with a 1350 series u-joint. This fits most 4X4 Ford F150 trucks and fullsize SUV’s. This fits most Borg Warner transfer cases 1356, 4406, 4417, etc.
| Weight | 3.20 lbs |
|---|---|
| Dimensions | 8 × 3 × 2 in |
General Inquiries
There are no inquiries yet.
Related products
This is a genuine Dana pinion yoke for a 1410 series u-joint that fits Dana 80 rear differentials. This will fit GM, Ford, and Dodge applications. This yoke is the same as the more expensive 3-4-11081-1X. It just has a little different dust shield on it. This one actually has more seal clearance.
View Details
This is a genuine AAM rear pinion yoke for the GM trucks with the 14 bolt 9.5 differential. These were in the light 3/4 trucks and has c-clips on the axles. These are for the 1350 series u-joint. This is the later style yoke with the sleeve on the seal surface. This can also be [...]
View Details
This is a genuine AAM pinion yoke with the balancer for the GM 3/4 and 1 ton trucks with the 11.5 rear differential 1999 and newer. This is for the 1480 or 1485 series u-joint. Can also be used on the 14 bolt 10.5 rear differentials.
View Details
This is a genuine AAM front driveshaft flange yoke for the 4X4 front driveshaft found in 2003 and newer Dodge Ram 2500 and 3500 series trucks. This yoke is serrated and made to mate with the serrated front pinion yoke.
View Details
This is a genuine AAM driveshaft flange yoke that fits the rear driveline where it bolts to the rear pinion flange. This is for the 1555 series universal joint. This mates with the 40062272 4 bolt pinion flange.
View Details
This is a genuine AAM slip yoke with a balancer that fits GM 4X4 1/2 ton trucks and SUV’s with the 246 transfer case and 1344 or 3R series universal joints. This slip yoke is 32 spline.
View Details
This is a genuine AAM rear pinion yoke for use on the early 1997 and older GM 8.5 10 bolt. This is for the Saginaw 3R series u-joint with the inside snap ring and no tabs on the yoke. This is for use with a National 2043 pinion seal and can be used on 1998 [...]
View Details
This is a genuine AAM driveshaft flange yoke that shows to fit 2003+ Dodge Ram trucks with the 1485 series universal joints. This is the yoke that mates with the 40062272 pinion flange. Please be aware that the 40055983A casting number is the same on both the 1415 and 1485 series yokes.
View Details