417-862-4455
G56 Countershaft Drive Gear 6th 6.7 Dodge Diesel 6 Speed Transmission
$225.00
- SKU: G56-9A
- Brand: Pro Active
- Weight: 12.0
- Shipping: Calculated at checkout
1 in stock
This countershaft drive gear is a double gear that includes the drive gear and 6th gear. There are 47 teeth on the drive gear and 52 on the 6th gear. This fits the 6.7 Dodge diesel engines only.
| Weight | 12.0 lbs |
|---|---|
| Dimensions | 6 × 4 × 2 in |
Be the first to review “G56 Countershaft Drive Gear 6th 6.7 Dodge Diesel 6 Speed Transmission”
You must be logged in to post a review.
| Make | Model | Year |
|---|---|---|
| Dodge Ram | 2500 | 2007 - 2008 |
| Dodge Ram | 2500 | 2009 - 2010 |
| Dodge Ram | 2500 | 2011 - 2012 |
| Dodge Ram | 2500 | 2013 - 2014 |
| Dodge Ram | 2500 | 2015 |
| Dodge Ram | 3500 | 2007 - 2008 |
| Dodge Ram | 3500 | 2009 - 2010 |
| Dodge Ram | 3500 | 2011 - 2012 |
| Dodge Ram | 3500 | 2013 - 2014 |
| Dodge Ram | 3500 | 2015 |
General Inquiries
There are no inquiries yet.
Related products
Transmission Parts
Shifter Shift Boot G56 Dodge diesel 6 speed transmission Orange
This shifter boot fits the G56 6 speed transmission found in Dodge diesel trucks.
View Details
Transmission Parts
This 4X4 mainshaft fits all NV5600 Dodge diesel 6 speed transmissions. It also has a Dodge part number on the box for reference 05010050AA. This is an aftermarket part and we have used the same supplier for more than 5 years without any issues.
View Details
Transmission Parts
This input shaft fits all ZF Ford 6 speeds with the 7.3 diesel engine.
View Details
This front bearing retainer fits NV4500 Dodge diesel with the aftermarket big 1 3/8″ input shafts. Still uses stock throwout bearing.
View Details
Transmission Parts
NV4500 cluster assembly 1997 and newer GM and Dodge w/short idler.
This is a complete cluster gear assembly for the 1997 and newer NV4500 transmissions in GM and Dodge trucks with the short idler gear. Note the smallest set of teeth run all the way back to the rear bearing.
View Details
Transmission Parts
1 3/8″ input shaft Dodge diesel and V10 NV4500 transmission 5 speed
This input shaft fits the NV4500 Dodge transmissions used behind the diesel or V10 gas engines. This is the larger 1 3/8″ clutch spline found on some aftermarket or factory 6 speed clutches.
View Details
Transmission Parts
This syncro ring kit fits Ford ZF 5 speeds 1996 and later S5-47. This set has 6 rings.
View Details
This bearing and seal kit fits all NV5600 dodge transmissions and includes all the tapered bearing and races and seals. It does not include any of the caged needle bearings. They are available in a seperate needle bearing kit.
View Details
Reviews
There are no reviews yet.