417-862-4455
Jeep JK Dana 44 Rear Axle Pinion Flange Yoke 2007-2016
$79.00
- SKU: 2004431
- Brand: Dana/Spicer
- Weight: 4.0
- Shipping: Calculated at checkout
This is a genuine Dana/Spicer pinion flange yoke for the Dana 44 rear axle found in 2007-2016 Jeep JK Wrangler. Here are some specs from Dana’s website:
| Brand | Spicer |
| Series | 1310 |
| Major Diameter (D) In. | 1.29 |
| Spline Count | 24 |
| Involute Spline | N |
| Pilot Diameter (C) In. | 1.77-F |
| Bolt Circle Dia.(B) In.(FL YK) | 3.35 |
| Bolt Hole Diameter In (FL YK) | M8-1.25T |
| Number Of Holes (FL YK) | 10 |
| Ground Hub Diameter In. | 1.875 |
| Length Thru Hole (F) In. | 1.5 |
| Flange Face To End Of Hub (G) | 3.07 |
| Companion Flange Assembly | Y |
| Material | Steel |
| Package Type | EACH |
| Package Qty | 1 |
| Weight | 3.59 LB |
| Country of Origin |
India |
| Weight | 4.0 lbs |
|---|---|
| Dimensions | 6 × 6 × 6 in |
General Inquiries
There are no inquiries yet.
Related products
This is a genuine Dana pinion yoke for a 1410 series u-joint that fits Dana 80 rear differentials. This will fit GM, Ford, and Dodge applications. This yoke is the same as the more expensive 3-4-11081-1X. It just has a little different dust shield on it. This one actually has more seal clearance.
View Details
This is a genuine AAM driveshaft slip yoke for a 1555 series driveline in a 2006 and newer Dodge Ram 2500 or 3500 series truck. It measures 9.52756″ long (from center of u-joint) 2.29961″ O.D. (where it slips into the transfer case) and 1.74803″ 34 spline. This yoke has been discontinued from AAM and 40098344 [...]
View Details
This is a genuine AAM pinion yoke that fits all GM 7.5/7.6/8.0 rear differentials. These were found in S10’s, Camaro’s, and Trailblazers. This is the later style yoke with the wear sleeve made on it, so you will have to use the 1998+ pinion seal. This is for the 1344 or 3R series u-joint with [...]
View Details
This is a genuine Dana/Spicer u-joint bolt and strap kit for the GM cars and trucks with the 3R or 1344 Saginaw series pinion yoke. The Saginaw uses inside snap rings to keep the u-joint centered in the yoke. Kit includes 2 straps and 4 bolts.
View Details
This is a genuine AAM rear pinion yoke for the GM trucks with the 14 bolt 9.5 differential. These were in the light 3/4 trucks and has c-clips on the axles. These are for the 1350 series u-joint. This is the later style yoke with the sleeve on the seal surface. This can also be [...]
View Details
This is a genuine AAM rear pinion yoke for use on the early 1997 and older GM 8.5 10 bolt. This is for the Saginaw 3R series u-joint with the inside snap ring and no tabs on the yoke. This is for use with a National 2043 pinion seal and can be used on 1998 [...]
View Details
This is a genuine AAM driveshaft flange yoke that shows to fit 2006+ Dodge Ram 2500 and 3500 series trucks with the 1415 series universal joints. This is the yoke that mates with the 40062272 pinion flange. Please note that the 40055983A casting number is the same on the 1485 series yoke as well.
View Details
New 246 261 263 Transfer Case Slip Yoke 1344/3R U-Joint Part # 40032054 1344/3R U-Joint 1.88583″ O.D. 7.87402″ Long 32 Spline 1.37402″ Diameter This is a genuine AAM part. OEM Numbers and Replacement Numbers N3R-3-1642X, 40012495, N3R-3-9161X, GM 12479383, 88963576, 7838665, 40009290, 40026154
View Details