This is an aftermarket nut for the rear of the mainshaft in a NV5600 6 speed manual transmission. These were used in Dodge diesel trucks from 2000-2005. This nut is the same in 2wd or 4wd versions.
NV5600 Dodge Ram 2500 3500 6 Speed Transmission Rear Mainshaft Nut 2000-2005
$21.95
- SKU: 27663
- Brand: New Venture
- Weight: .40
- Shipping: Calculated at checkout
Out of stock
Weight | .40 lbs |
---|---|
Dimensions | 1 × 3 × 3 in |
Related products
Transmission Parts
NV4500 cluster assembly 1997 and newer GM and Dodge w/short idler.
This is a complete cluster gear assembly for the 1997 and newer NV4500 transmissions in GM and Dodge trucks with the short idler gear. Note the smallest set of teeth run all the way back to the rear bearing.
View DetailsTransmission Parts
Cast Iron Tailhousing Transfer Case Adapter Dodge diesel NV4500 5 Speed Transmission
This is a cast iron tailhousing that fits a NV4500 5 speed transmission in the Dodge diesel trucks. This is much heavier that the factory aluminum piece and is a direct bolt on replacement. These have the 2 threaded holes on the side for the transfer case shifter, so they will fit all years.
View DetailsTransmission Parts
This first gear fits all NV5600 Dodge diesel 6 speed transmissions. If you have an early (2001 & older) transmission you will have to use the updated lined synchronizer ring. There is a Dodge part number on the box for reference 05019907AA. This is an aftermarket part. We have used the same supplier for over [...]
View DetailsTransmission Parts
This mainshaft fits all NV5600 2wd Dodge diesel 6 speed transmission. The box has a Dodge part number 05010049AA for reference. This is an aftermarket part. We have been using the same supplier on these for over 5 years without an issue.
View DetailsTransmission Parts
Inner Synchronizer ring NV5600 Dodge diesel 6 speed transmission updated
This synchronizer ring fits all the later (2002 & up) NV5600 transmission found in the Dodge diesel trucks. 22760 is our part number, but some suppliers use a part number 44548. There are 7 of these in 1 transmission and they are all the same.
View DetailsThis front bearing retainer fits NV4500 Dodge diesel with the aftermarket big 1 3/8″ input shafts. Still uses stock throwout bearing.
View DetailsTransmission Parts
This input shaft fits the G56 Dodge 6 speed manual transmission found behind the 5.9 Cummins diesel engine. It has 2 I.D. grooves on the shaft and 27 teeth on the gear.
View DetailsTransmission Parts
Front bearing retainer G56 Dodge diesel 6 speed transmission
This front bearing retainer fits all G56 6 speed transmissions in Dodge diesel applications. It is 3 bolt mounting. This is the snout that the throwout bearing rides on. It replaces the factory tin snout.
View Details