This is a genuine yellow o-ring that fits 1998-2004 Ford F250 and F350 Super Duty 4X4 trucks with either the Dana 50 or 60 front axle. This o-ring goes on the backside of the wheel bearing hub assembly and seals against the steering knuckle.
O RING SEAL FORD SUPER DUTY F350 F250 DANA 50 60 FRONT 4X4 WHEEL HUB BEARING
$2.50
- SKU: 41784-2
- Brand: Dana/Spicer
- Weight: .25
- Shipping: Calculated at checkout
| Weight | .25 lbs |
|---|---|
| Dimensions | 6 × 4 × 2 in |
Be the first to review “O RING SEAL FORD SUPER DUTY F350 F250 DANA 50 60 FRONT 4X4 WHEEL HUB BEARING”
You must be logged in to post a review.
| Make | Model | Year |
|---|---|---|
| Ford | F250 | 1998 - 1999 |
| Ford | F250 | 2000 - 2001 |
| Ford | F250 | 2002 - 2003 |
| Ford | F250 | 2004 |
| Ford | F350 | 1998 - 1999 |
| Ford | F350 | 2000 - 2001 |
| Ford | F350 | 2002 - 2003 |
| Ford | F350 | 2004 |
General Inquiries
There are no inquiries yet.
Related products
This is a genuine AAM rear hub snap ring that holds the outer bearing in the hub on a full floating 2011 or newer GM 10.5 or 11.5 rear axle. This snap ring measures 3 7/8″ O.D.
View DetailsSmall Parts & Seals
This is a Dana 80 pinion yoke that mostly shows to fit Ford applications with the 1480 series u-joints. May have to remove the tin dust shield for seal clearance.
View DetailsSmall Parts & Seals
This is a genuine rear wheel hub seal for 2011 and newer GM 3/4 and 1 ton trucks with either the 10.5 or 11.5 rear axle and single or dual rear wheels. This part number is actually on the seal itself.
View DetailsSmall Parts & Seals
Ford Straight Front Axle Steering Knuckle Seal 2006+ Dana 50 & 60
This is a genuine Dana front steering knuckle seal that fits 2006 and newer Ford F250 & F350 with either a Dana 50 or Dana 60 straight front axle. The seal is marked SKF 2017426 DANA. This seal measures approx. 5.48″ outside diameter. The original part number was 2017426.
View DetailsThis is a genuine AAM pinion nut that fits the 11.5 rear differential found in 3/4 and 1 ton GM & Dodge trucks. We also have the washer (40003255) available for this nut. This nut also fits the 10.5 Dodge rear differential. We use a 1 7/16″ 12 point socket on these, but it may [...]
View DetailsSmall Parts & Seals
This is a genuine Dana 80 pinion yoke for the 1410 series u-joint. This fits all Dana 80’s including Chevy, Ford, and Dodge. Some applications may require removal of tin dust shield for seal clearance.
View DetailsSmall Parts & Seals
This is a genuine AAM crush sleeve for the 11.5 rear differential found in GM and Dodge 3/4 & 1 ton trucks.
View DetailsSmall Parts & Seals
GM 8.6 Pinion Yoke Sleeve Seal 1999+ Chevrolet 10 Bolt 1/2 Ton 3/4 GM9.5 14 Bolt Trucks & SUVs
This is a genuine AAM pinion yoke sleeve that fits 1999 and newer GM 1/2 ton trucks also some 1998 model Suburban and Tahoe. This sleeve goes on the yoke and the pinion seal seals against it. We have also found on some yokes you can simply remove this sleeve and used the earlier National [...]
View Details
417-862-4455


Reviews
There are no reviews yet.