417-862-4455
1995-2003 Zf 5 Speed Transmission Quill S5-47 Ford Super Duty F250 F350 7.3 Diesel or 7.5 Gas Front Retainer
$25.00
- SKU: 1317302010
- Brand: ZF
- Weight: 1.0
- Shipping: Calculated at checkout
2 in stock
This is an aftermarket quill for the front of a S5-47 ZF 5 speed transmission. This attaches with 3 bolts. This only fits Ford trucks with the 7.3 diesel or 7.5 gas engines. Note that this is different from the 6 speed quill.
| Weight | 1.0 lbs |
|---|---|
| Dimensions | 6 × 6 × 6 in |
General Inquiries
There are no inquiries yet.
Related products
Transmission Parts
Cast Iron Tailhousing Transfer Case Adapter Dodge Diesel NV4500 5 Speed Transmission 1994-2003 4X4
This is a cast iron tailhousing that fits a NV4500 5 speed transmission in the Dodge diesel trucks. This is much heavier that the factory aluminum piece and is a direct bolt on replacement. These have the 2 threaded holes on the side for the transfer case shifter, so they will fit all years.
View Details
This bearing and seal kit fits all Dodge NV4500 transmissions and GM NV4500 transmissions with the external slave cylinder up to 1995. This kit has all the seals, tapered bearings and races as well as the mainshaft pilot and thrust bearing and countershaft front plug. This kit does not include the caged needle bearings underneath [...]
View Details
Transmission Parts
NV4500 cluster assembly 1997 and newer GM and Dodge w/short idler.
This is a complete cluster gear assembly for the 1997 and newer NV4500 transmissions in GM and Dodge trucks with the short idler gear. Note the smallest set of teeth run all the way back to the rear bearing.
View Details
Transmission Parts
NV4500 cluster assembly early up to 1996 Dodge and GM 5:61 ratio
This cluster fits 1992-1996 Dodge and most GM NV4500 transmissions with the 22 tooth input shaft and 5:61 ratio.
View Details
Transmission Parts
This input shaft fits all Dodge NV5600 6 speed transmissions with the 1 3/8″ clutch spline. It is made for use with the updated synchronizer rings.
View Details
Transmission Parts
This first gear fits all NV5600 Dodge diesel 6 speed transmissions. If you have an early (2001 & older) transmission you will have to use the updated lined synchronizer ring. There is a Dodge part number on the box for reference 05019907AA. This is an aftermarket part. We have used the same supplier for over [...]
View Details
Transmission Parts
Stock replacement front bearing retainer Dodge diesel and V10 NV4500 transmission
This is a stock replacement front bearing retainer for the NV4500 transmissions found in the Dodge diesel or V10 gas trucks. Fits all years with stock inputs.
View Details
Transmission Parts
Inner Synchronizer ring NV5600 Dodge diesel 6 speed transmission updated
This synchronizer ring fits all the later (2002 & up) NV5600 transmission found in the Dodge diesel trucks. 22760 is our part number, but some suppliers use a part number 44548. There are 7 of these in 1 transmission and they are all the same.
View Details