This is an aftermarket sprocket for the Borg Warner 4446/4447 (Dodge) and 4464/4465 (Ford) transfer case. These were used in Dodge Ram 2500 and 3500 series trucks from 2012+, and F250, F350, F450, and F550 series trucks from 2017+. The original Dodge part number was 68161363AB. This is used with the HV064 chain. We do not have the drive sprockets available for these transfer cases yet.
2012+ Dodge Ram 2500 3500 4446/4447 2017+ Ford F250 F350 F450 F550 4464/4465 Transfer Case Driven Sprocket
$69.00
- SKU: 68161363
- Brand: Pro Active
- Weight: 5.5
- Shipping: Calculated at checkout
2 in stock
Weight | 5.5 lbs |
---|---|
Dimensions | 6 × 6 × 2 in |
Related products
Bearing Kits
261XHD & 263XHD GM Transfer Case Bearing and Seal Rebuild Kit Chevy 1999-2007 Duramax 6.6
This bearing and seal kit fits 261XHD and 263XHD transfer cases in 3/4 and 1 ton GM trucks with the 8.1 gas or Duramax diesel engines. It is a very complete kit including all the bearings and seals as well as thrust washers for the input/planetary, fork inserts for the 263XHD range fork, and even [...]
View DetailsTransfer Case Parts
This range slider fits all versions of the 231 241 and 261 transfer cases, except 241DHD with the PTO opening on the side of the transfer case. Including GM, Dodge, and Jeep.
View DetailsTransfer Case Parts
GM NP261HD and NP263HD GM Transfer Case Chain Chevy 1999-2007
This Morse chain fits mots 261HD and 263HD GM transfer cases. It is 1 1/2″ wide and 49 links. Be sure to check your chain before ordering as I have seen the HV072 or HV074 chains in these units.
View DetailsSmall Parts & Seals
271 & 273 Dodge Transfer Case Large Booted Rear Seal 271D 273D 2003+
This is the large booted seal for the rear of a 271 or 273 Dodge transfer case with a rear slip yoke. The New Venture part number is 38249. These are almost impossible to get at your local auto parts store. These are used with the 45379 rear bushing. This seal can also be used [...]
View DetailsTransfer Case Parts
10 spline coupler for early GM 205 transfer case to 4 speed standard transmission 4 1/4″ long.
10 spline female coupler for early HM 205 transfer cases used behind 4 speed manual transmission.
View DetailsThis bearing and seal kit fits all 261 & 263 GM transfer cases from 1999-2007, except the XHD versions found behind the 8.1 or Duramax engines. They are very complete including all the seals and bearings as well as input/planetary thrust washers and fork inserts for the 263 and a transfer case mounting gasket.
View DetailsTransfer Case Parts
1999-2007 Chevy 261 & 263 GM Transfer Case Middle Synchronizer Ring Fiber Lined Syncro Mode
This is the middle synchronizer ring for a 261 or 263 GM transfer case. It is 1 of 3 parts that make up the synchronizer pack.
View DetailsTransfer Case Parts
This range hub fits all 241DHD transfer cases with the PTO opening on the side of the transmission. This is used with 17520 snap ring and 17522 range collar.
View Details