This is a key and spring kit for the 241DHD or 241DLD transfer cases found in 1994-2002 Dodge Ram trucks. These are for the larger diameter synchronizer.
241DHD 241DLD Transfer Case Synchronizer Key & Spring Kit Dodge 241 Heavy Duty
$19.95
- SKU: NP241-K
- Brand: New Venture
- Weight: .30
- Shipping: Calculated at checkout
Weight | .30 lbs |
---|---|
Dimensions | 6 × 4 × 2 in |
Be the first to review “241DHD 241DLD Transfer Case Synchronizer Key & Spring Kit Dodge 241 Heavy Duty”
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
Dodge Ram | 1500 | 1990 - 1991 |
Dodge Ram | 1500 | 1992 - 1993 |
Dodge Ram | 1500 | 1994 - 1995 |
Dodge Ram | 1500 | 1996 - 1997 |
Dodge Ram | 1500 | 1998 - 1999 |
Dodge Ram | 1500 | 2000 - 2001 |
Dodge Ram | 1500 | 2002 - 2003 |
Dodge Ram | 2500 | 1990 - 1991 |
Dodge Ram | 2500 | 1992 - 1993 |
Dodge Ram | 2500 | 1994 - 1995 |
Dodge Ram | 2500 | 1996 - 1997 |
Dodge Ram | 2500 | 1998 - 1999 |
Dodge Ram | 2500 | 2000 - 2001 |
Dodge Ram | 2500 | 2002 - 2003 |
Dodge Ram | 3500 | 1990 - 1991 |
Dodge Ram | 3500 | 1992 - 1993 |
Dodge Ram | 3500 | 1994 - 1995 |
Dodge Ram | 3500 | 1996 - 1997 |
Dodge Ram | 3500 | 1998 - 1999 |
Dodge Ram | 3500 | 2000 - 2001 |
Dodge Ram | 3500 | 2002 - 2003 |
Related products
Transfer Case Parts
10 spline coupler for early GM 205 transfer case to 4 speed standard transmission 4 1/4″ long.
10 spline female coupler for early HM 205 transfer cases used behind 4 speed manual transmission.
View DetailsTransfer Case Parts
GM NP261HD and NP263HD GM Transfer Case Chain Chevy 1999-2007
This Morse chain fits mots 261HD and 263HD GM transfer cases. It is 1 1/2″ wide and 49 links. Be sure to check your chain before ordering as I have seen the HV072 or HV074 chains in these units.
View DetailsSmall Parts & Seals
271 & 273 Dodge Transfer Case Large Booted Rear Seal 271D 273D 2003+
This is the large booted seal for the rear of a 271 or 273 Dodge transfer case with a rear slip yoke. The New Venture part number is 38249. These are almost impossible to get at your local auto parts store. These are used with the 45379 rear bushing. This seal can also be used [...]
View DetailsTransfer Case Parts
This aluminum mode fork fits all GM 261 and 263 transfer cases. This fork has built in fork pads and is ready to install.
View DetailsTransfer Case Parts
1999-2007 Chevy 261 & 263 GM Transfer Case Middle Synchronizer Ring Fiber Lined Syncro Mode
This is the middle synchronizer ring for a 261 or 263 GM transfer case. It is 1 of 3 parts that make up the synchronizer pack.
View DetailsBearing Kits
261XHD & 263XHD GM Transfer Case Bearing and Seal Rebuild Kit Chevy 1999-2007 Duramax 6.6
This bearing and seal kit fits 261XHD and 263XHD transfer cases in 3/4 and 1 ton GM trucks with the 8.1 gas or Duramax diesel engines. It is a very complete kit including all the bearings and seals as well as thrust washers for the input/planetary, fork inserts for the 263XHD range fork, and even [...]
View DetailsTransfer Case Parts
This range fork fits all versions of the 263 GM transfer case including 263XHD. This is the updated fork for use with the 43681 range slider with the wider groove for the shift fork. If your transfer case is 2002 or older you may have to update the slider as well. This fork does not [...]
View DetailsTransfer Case Parts
Aluminum Rear Case 1/2 fits GM 261XHD and 263XHD Transfer Cases 1999-2007 Chevy
This is an aluminum transfer case rear case 1/2 that fits 261XHD and 263XHD transfer cases found in Chevrolet and GMC trucks with either the 8.1 gas engine or Duramax diesel engine and Allison automatic or ZF standard transmissions. This case eliminates the problem with the oil pump wearing through the case. It does not [...]
View Details
Reviews
There are no reviews yet.