417-862-4455
271F 273F Transfer Case 24 Spline Input Shaft Ford Super Duty NP271F NP273F 1998-2002 ZF 6 Speed Manual Transmission
$89.95
- SKU: 26605
- Brand: Transtar
- Weight: 4.0
- Shipping: Calculated at checkout
2 in stock
This is an aftermarket input shaft for a 271F or 273F Ford transfer case. This shaft has 24 internal splines, which goes behind the ZF 6 speed manual transmission.
| Weight | 4.0 lbs |
|---|---|
| Dimensions | 6 × 3 × 3 in |
Related products
Transfer Case Parts
This range hub fits all 241DHD transfer cases with the PTO opening on the side of the transmission. This is used with 17520 snap ring and 17522 range collar.
View Details
Transfer Case Parts
GM 261 & 263 XHD Transfer Case Mainshaft Chevy Duramax or 8100 261XHD 263XHD 1999-2007
This mainshaft fits the GM 261 and 263 SHD or XHD transfer case found behind the Allison automatic transmissions or ZF 6 speed manual transmissions.
View Details
Transfer Case Parts
This range fork fits all 271 Dodge transfer cases. The casting number is the same as the part number.
View Details
Transfer Case Parts
This is the hub that splines into the sprocket and synchronizer clutch and rides on the mainshaft of the transfer case on a 261 or 263 GM. This one is made to use the seperate synchronizer clutch. Be sure that yours is made like this as some were a 1 piece design with the synchronizer [...]
View Details
Small Parts & Seals
271 & 273 Dodge Transfer Case Large Booted Rear Seal 271D 273D 2003+
This is the large booted seal for the rear of a 271 or 273 Dodge transfer case with a rear slip yoke. The New Venture part number is 38249. These are almost impossible to get at your local auto parts store. These are used with the 45379 rear bushing. This seal can also be used [...]
View Details
Transfer Case Parts
263 GM Transfer Case Range Slider Updated Wide Groove 263HD 263XHD
This range slider fits all versions of the 263 GM transfer case including 263XHD. This is the updated slider with the wide groove. To be used with the 41819 range fork.
View Details
Transfer Case Parts
1999-2007 Chevy 261 & 263 GM Transfer Case Middle Synchronizer Ring Fiber Lined Syncro Mode
This is the middle synchronizer ring for a 261 or 263 GM transfer case. It is 1 of 3 parts that make up the synchronizer pack.
View Details
Transfer Case Parts
GM NP261HD and NP263HD GM Transfer Case Chain Chevy 1999-2007
This Morse chain fits mots 261HD and 263HD GM transfer cases. It is 1 1/2″ wide and 49 links. Be sure to check your chain before ordering as I have seen the HV072 or HV074 chains in these units.
View Details