417-862-4455
Dana 30 35 44 JK Jeep Front, Ford 10.25/10.50 AMC 20 Rear Pinion Nut
$2.45
- SKU: 44189
- Brand: Dana/Spicer
- Weight: .30
- Shipping: Calculated at checkout
This is a genuine Dana/Spicer pinion nut that fits various applications including some Dana 30 and 44 JK Jeeps and Ford 10.25/10.5 rear ends. Also fits AMC 20 rear ends. This was also uses on some New Process transfer cases including 205 (with 32 spline shaft) 208, 241, 243, 271, and 273 front output shafts. These use a 1 1/8″ socket. This replaces Dana part number 2001153 for the Jeep JK.
| Weight | .30 lbs |
|---|---|
| Dimensions | 6 × 4 × 2 in |
Be the first to review “Dana 30 35 44 JK Jeep Front, Ford 10.25/10.50 AMC 20 Rear Pinion Nut”
You must be logged in to post a review.
| Make | Model | Year |
|---|---|---|
| Ford | F250 | 1985 - 1986 |
| Ford | F250 | 1987 - 1988 |
| Ford | F250 | 1989 - 1990 |
| Ford | F250 | 1991 - 1992 |
| Ford | F250 | 1993 - 1994 |
| Ford | F250 | 1995 - 1996 |
| Ford | F250 | 1997 - 1998 |
| Ford | F250 | 1999 - 2000 |
| Ford | F250 | 2001 - 2002 |
| Ford | F250 | 2003 - 2004 |
| Ford | F250 | 2005 - 2006 |
| Ford | F250 | 2007 - 2008 |
| Ford | F250 | 2009 |
| Ford | F350 | 1985 - 1986 |
| Ford | F350 | 1987 - 1988 |
| Ford | F350 | 1989 - 1990 |
| Ford | F350 | 1991 - 1992 |
| Ford | F350 | 1993 - 1994 |
| Ford | F350 | 1995 - 1996 |
| Ford | F350 | 1997 - 1998 |
| Ford | F350 | 1999 - 2000 |
| Ford | F350 | 2001 - 2002 |
| Ford | F350 | 2003 - 2004 |
| Ford | F350 | 2005 - 2006 |
| Ford | F350 | 2007 - 2008 |
| Ford | F350 | 2009 |
| Jeep | AMC20 | 1975 - 1976 |
| Jeep | AMC20 | 1977 - 1978 |
| Jeep | AMC20 | 1979 - 1980 |
| Jeep | AMC20 | 1981 - 1982 |
| Jeep | AMC20 | 1983 - 1984 |
| Jeep | CJ5 | 1975 - 1976 |
| Jeep | CJ5 | 1977 - 1978 |
| Jeep | CJ5 | 1979 - 1980 |
| Jeep | CJ5 | 1981 - 1982 |
| Jeep | CJ5 | 1983 - 1984 |
| Jeep | CJ7 | 1975 - 1976 |
| Jeep | CJ7 | 1977 - 1978 |
| Jeep | CJ7 | 1979 - 1980 |
| Jeep | CJ7 | 1981 - 1982 |
| Jeep | CJ7 | 1983 - 1984 |
General Inquiries
There are no inquiries yet.
Related products
Small Parts & Seals
This is a genuine AAM pinion yoke sleeve that fits 1999 and newer GM 3/4 and 1 ton trucks with either a 10.5 or 11.5 ring gear. This sleeve goes on the yoke and the pinion seal seals against it. We have also found on some yokes you can simply remove this sleeve and used [...]
View Details
Small Parts & Seals
GM 10 12 Bolt 8.5/8.6 Ford 8.8 Rear Axle C-Clip 8.875 Chevrolet Car Truck
This is a genuine AAM c-clip for the GM 8.5/8.6 10 bolt and 8.875 12 bolt also Ford 8.8 rear axles. These are copper colored steel c-clips. 2 required per vehicle.
View Details
Small Parts & Seals
GM 7.5/7.6 Rear Axle C-Clip S10 Camaro Chevrolet 10 Bolt 7 1/2″
This is a genuine AAM c-clip for the GM 7.5/7.6 rear axle found in S10’s, Malibu’s, Camaro’s etc. These are copper colored steel. These are for both open and limited slip style carriers. 2 required per vehicle.
View Details
Small Parts & Seals
271 & 273 Dodge Transfer Case Large Booted Rear Seal 271D 273D 2003+
This is the large booted seal for the rear of a 271 or 273 Dodge transfer case with a rear slip yoke. The New Venture part number is 38249. These are almost impossible to get at your local auto parts store. These are used with the 45379 rear bushing. This seal can also be used [...]
View Details
Small Parts & Seals
This is a genuine rear wheel hub seal for 2011 and newer GM 3/4 and 1 ton trucks with either the 10.5 or 11.5 rear axle and single or dual rear wheels. This part number is actually on the seal itself.
View Details
This is a genuine AAM pinion nut that fits the 11.5 rear differential found in 3/4 and 1 ton GM & Dodge trucks. We also have the washer (40003255) available for this nut. This nut also fits the 10.5 Dodge rear differential. We use a 1 7/16″ 12 point socket on these, but it may [...]
View Details
Small Parts & Seals
Ford Straight Front Axle Tube Dust Seal 1998.5-2005 Dana 50 & 60
This genuine Dana axle tube dust seal fits 1998.5-2005 Ford F250 and F350 dana 50 and 60 straight front axles. This seal is marked FORSHEDA 11 10.060 D768-11 50381.These are approx. 3.125″ outside diameter, which is smaller than the later ones. This seal goes on the axle itself right behind the u-joint at the end [...]
View Details
Small Parts & Seals
This is a genuine Dana pinion nut that fits all Dana 80 rear differentials. This nut uses an 1 7/8″ socket to remove and install it. Some yokes require a very thin wall socket. The newest Dana part number for this yoke is 2001855.
View Details
Reviews
There are no reviews yet.