This is a genuine Dana/Spicer pinion nut that fits Dana 30 and 44 differentials. This nut also fits a New Process 205 Transfer case with either a 10 or a 30 spline output shaft. This nut is 3/4-16TPI.
Dana 30 44 Pinion Yoke Nut GM Ford Dodge Jeep Also 205 Transfer Case with 10 or 30 Spline Output Shaft
$1.25
- SKU: 30185
- Brand: Dana/Spicer
- Weight: .25
- Shipping: Calculated at checkout
Weight | .25 lbs |
---|---|
Dimensions | 1 × 1 × 1 in |
Related products
This is a genuine AAM rear hub snap ring that holds the outer bearing in the hub on a full floating 2011 or newer GM 10.5 or 11.5 rear axle. This snap ring measures 3 7/8″ O.D.
View DetailsSmall Parts & Seals
This is a genuine AAM rear pinion seal that fits 1998 to 2014 GM trucks and SUV’s with 8.6 rear end with the 10 bolt cover. This is for the yoke with the factory wear sleeve on it.
View DetailsSmall Parts & Seals
This is a genuine Dana pinion nut that fits all Dana 80 rear differentials. This nut uses an 1 7/8″ socket to remove and install it. Some yokes require a very thin wall socket. The newest Dana part number for this yoke is 2001855.
View DetailsSmall Parts & Seals
Ford Straight Front Axle Tube Dust Seal 1998.5-2005 Dana 50 & 60
This genuine Dana axle tube dust seal fits 1998.5-2005 Ford F250 and F350 dana 50 and 60 straight front axles. This seal is marked FORSHEDA 11 10.060 D768-11 50381.These are approx. 3.125″ outside diameter, which is smaller than the later ones. This seal goes on the axle itself right behind the u-joint at the end [...]
View DetailsSmall Parts & Seals
2003+ Dodge Ram 3500 Dual Dually Rear Wheel Hub Seal 11.5 AAM
This is a genuine rear wheel hub seal for 2003 and newer Dodge 1 ton trucks with either the 11.5 rear axle and dual rear wheels. This part number is actually on the seal itself. The National seal part number is 710563.
View DetailsSmall Parts & Seals
Ford Straight Front Axle Steering Knuckle Seal 1998.5-2005 Dana 50 & 60
This is a genuine Dana front steering knuckle seal that fits 1998.5-2005 Ford F250 & F350 with either a Dana 50 or Dana 60 straight front axle. The seal is marked FRESHEDA 5H-15052 A085824 RDS 81. This seal measures approx. 4.46″ outside diameter
View DetailsSmall Parts & Seals
This is a genuine AAM pinion nut washer found on GM & Dodge 3/4 and 1 ton trucks. This is to be used with nut part number 40003027.
View DetailsSmall Parts & Seals
2003+ Dodge Ram 2500/3500 Single Rear Wheel Hub Seal 10.5/11.5 AAM
This is a genuine rear wheel hub seal for 2003 and newer Dodge 3/4 and 1 ton trucks with either the 10.5 or 11.5 rear axle and single rear wheels. This part number is actually on the seal itself. The new AAM part number for this seal is 40156029, but we still use the original [...]
View Details